Electronic Components Datasheet Search
TDA8922C Datasheet(PDF) 39 Page - NXP Semiconductors
2 X 75 W
NXP [NXP Semiconductors]
TDA8922C Datasheet(HTML) 39 Page - NXP Semiconductors
/ 40 page
© NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 — 7 September 2009
39 of 40
× 75 W class-D power ampliﬁer
18. Legal information
Data sheet status
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Deﬁnitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modiﬁcations or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
ofﬁce. In case of any inconsistency or conﬂict with the short data sheet, the
full data sheet shall prevail.
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation speciﬁcations and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
speciﬁed use without further testing or modiﬁcation.
Limiting values — Stress above one or more limiting values (as deﬁned in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conﬂict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
19. Contact information
For more information, please visit:
For sales ofﬁce addresses, please send an email to:
Objective [short] data sheet
This document contains data from the objective speciﬁcation for product development.
Preliminary [short] data sheet
This document contains data from the preliminary speciﬁcation.
Product [short] data sheet
This document contains the product speciﬁcation.
Does ALLDATASHEET help your business so far?
[ DONATE ]
All Rights Reserved©
| English :
| Chinese :
| German :
| Japanese :
| Korean :
| Spanish :
| French :
| Italian :
| Polish :
| Vietnamese :