STM32F101C4T6ATR datasheet(14/73 Pages) STMICROELECTRONICS

Part #	STM32F101C4T6ATR

Description	Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces

Download	73 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

14 / 73 page

Description

STM32F101x4, STM32F101x6

14/74

Doc ID 15058 Rev 3

2.3

Overview

2.3.1

ARM® Cortex™-M3 core with embedded Flash and SRAM

The ARM Cortex™-M3 processor is the latest generation of ARM processors for embedded

systems. It has been developed to provide a low-cost platform that meets the needs of MCU

implementation, with a reduced pin count and low-power consumption, while delivering

outstanding computational performance and an advanced system response to interrupts.

The ARM Cortex™-M3 32-bit RISC processor features exceptional code-efficiency,

delivering the high-performance expected from an ARM core in the memory size usually

associated with 8- and 16-bit devices.

The STM32F101xx low-density access line family having an embedded ARM core, is

therefore compatible with all ARM tools and software.

2.3.2

Embedded Flash memory

16 or 32 Kbytes of embedded Flash is available for storing programs and data.

2.3.3

CRC (cyclic redundancy check) calculation unit

The CRC (cyclic redundancy check) calculation unit is used to get a CRC code from a 32-bit

data word and a fixed generator polynomial.

Among other applications, CRC-based techniques are used to verify data transmission or

storage integrity. In the scope of the EN/IEC 60335-1 standard, they offer a means of

verifying the Flash memory integrity. The CRC calculation unit helps compute a signature of

the software during runtime, to be compared with a reference signature generated at link-

time and stored at a given memory location.

2.3.4

Embedded SRAM

Up to 6 Kbytes of embedded SRAM accessed (read/write) at CPU clock speed with 0 wait

states.

2.3.5

Nested vectored interrupt controller (NVIC)

The STM32F101xx low-density access line embeds a nested vectored interrupt controller

able to handle up to 43 maskable interrupt channels (not including the 16 interrupt lines of

Cortex™-M3) and 16 priority levels.

●

Closely coupled NVIC gives low latency interrupt processing

●

Interrupt entry vector table address passed directly to the core

●

Closely coupled NVIC core interface

●

Allows early processing of interrupts

●

Processing of late arriving higher priority interrupts

●

Support for tail-chaining

●

Processor state automatically saved

●

Interrupt entry restored on interrupt exit with no instruction overhead

This hardware block provides flexible interrupt management features with minimal interrupt

latency.

Similar Part No. - STM32F101C4T6ATR

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	STM32F101C4T6A	1Mb / 79P	Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces

More results

Similar Description - STM32F101C4T6ATR

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	STM32F101T6U6A	1Mb / 79P	Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces
	STM32F101C4T6A	1Mb / 79P	Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces
	STM32F101C6T6	1Mb / 79P	Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces
	STM32F101R6T6	1Mb / 79P	Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers, ADC and 4 communication interfaces
	STM32F101X4	1Mb / 77P	Low-density access line, ARM-based 32-bit MCU with 16 or 32 KB Flash, 5 timers
	STM32F102X4	872Kb / 69P	Low-density USB access line, ARM-based 32-bit MCU with 16/32 KB Flash, USB FS interface, 5 timers, ADC & 5 communication interfaces
	STM32F102C6T6A	855Kb / 69P	Low-density USB access line, ARM-based 32-bit MCU with 16/32 KB Flash, USB FS interface, 5 timers, ADC & 5 communication interfaces
	STM32F101X8	999Kb / 81P	Medium-density access line, ARM-based 32-bit MCU with 64 or 128 KB Flash, 6 timers, ADC and 7 communication interfaces
	STM32F101RBH6	1Mb / 90P	Medium-density access line, ARM-based 32-bit MCU with 64 or 128 KB Flash, 6 timers, ADC and 7 communication interfaces
	STM32F101X8	1Mb / 85P	Medium-density access line, ARM-based 32-bit MCU with 64 or 128 KB Flash, 6 timers, ADC and 7 communication interfaces

More results

STM32F101C4T6ATR Datasheet(PDF) 14 Page - STMicroelectronics

STM32F101C4T6ATR Datasheet(HTML) 14 Page - STMicroelectronics

Similar Part No. - STM32F101C4T6ATR

Similar Description - STM32F101C4T6ATR

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Datasheet Download

Link URL