H HiTRON

2008/09/26

UNIVERSAL INPUT HARMONIC CORRECTION

RESONANT AC-DC OPEN FRAME TRIPLE OUTPUT 200 WATTS

INTERNAL SWITCHING POWER SUPPLIES HIRP200 SERIES

OUTPUT SPECIFICATION

Output Voltage: See Ratings Chart.

Output Current: See Ratings Chart.

Output Connector: V-H connectors.

Output Wattage: Max. 200W.

Line Regulation: Typ. ±0.1%.

Load Regulation: VO1 & VO3 typ. ±1%.

VO2 typ. ± 3.0%.

Noise & Ripple: Typ. 1.0% peak to peak.

OVP: Installed in VO1 & VO2 (Latch).

Adjustability: Available at VO1.

DC OK Signal: Installed.

Overload Protection (OLP): Fully protected against

output overload and short circuit. Typical 115-130% at

115Vac.Consult the factory for the special OLP setting.

SPECIFICATION

INPUT SPECIFICATION

Input Voltage: Typ. 90-264Vac with PFC.

Input Connector: V-M connector.

Input Frequency: 47-63Hz.

Inrush Current: Typ. 11.4-11.7Arms@230Vac.

Input Current: 1.95-2.16A @115Vac, 1.0-1.15A @230Vac.

Dielectric Withstand: Meet IEC 60950-1.

EMI: Meet CISPR PUB. 22 & FCC Class A.

Hold-up Time: Typ. 16-18mS @115Vac & 230Vac.

Power Fail Signal: Installed.

Remote ON/OFF: Installed.

Power Factor & Harmonic Correction:

Meet IEC 61000-3-2, PF typ.0.95@ full load.

Leakage Current: Less than 0.75-0.79mA.

FEATURES:

ACCOMMODATE UNIVERSAL AC SOURCES

5” x 3” COMPACT SIZE IN 1U HEIGHT

5V STAND-BY & 12V FAN OUTPUTS

RESONANT DESIGN CIRCUIT

MEET UNIVERSAL SAFETY STANDARDS

EMI MEET CISPR PUB. 22 & FCC CLASS A

CE MARKING COMPLIANCE

POWER DENSITY AS HIGH AS 9.95W/C.I.

GENERAL SPECIFICATION

Efficiency: Typ. 87-92%.

Switching Frequency: 100-105K Hz.

Circuit Topology: ZVS circuit.

Transient Response:

+12V and +24V voltage returns within 1mS following

a 25% load change.

+48V voltage returns within 1.75mS following

a 25% load change.

Safety Standard: UL 60950-1/EN 60950-1 Class I.

Operating Temperature: 0 to +50°C at full load with

specified air flow.

Storage Temperature: 0 to +85°C.

Temperature Coefficient: 0.05%/°C.

Cooling: 400LFM airflow is required to deliver the full

power. 200W.

Construction: PCB format.

Power Density: 9.95 Watts / Cubic Inch.

Note: (1)Due to requests in market and advances in technology, specifications subject to change without notification.

(2)All measurement are at nominal input, full load and +26°C unless otherwise specifications.