Electronic Components Datasheet Search |
|
XPD-MR-04-46CDA Datasheet(PDF) 4 Page - Source Photonics, Inc. |
|
XPD-MR-04-46CDA Datasheet(HTML) 4 Page - Source Photonics, Inc. |
4 / 6 page 10 Gbps 40km DWDM Multirate XFP Transceiver Preliminary XPD-MR-04-xxCDA 4 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 LUMINENTOIC.COM LUMNDS641-NOV1106 Rev. 0.2 Pin Logic Symbol Name/Description Note 1 GND Module Ground 1 2 VEE5 Optional -5.2V Power Supply (not used) 3 LVTTL-I Mod_DeSel Module De-select; When held low allows module to respond to 2-wire interface 4 LVTTL-O Interrupt Interrupt; Indicates presence of an important condition which can be read over the 2-wire serial interface 2 5 LVTTL-I TX_DIS Transmitter Disable; Turns off transmitter laser output 6 Vcc5 +5V Power Supply 7 GND Module Ground 1 8 Vcc3 +3.3V Power Supply 9 Vcc3 +3.3V Power Supply 10 LVTTL-I/O SCL 2-Wire Serial Interface Clock 2 11 LVTTL-I/O SDA 2-Wire Serial Interface Data Line 2 12 LVTTL-O Mod_Abs Indicates Module is not present. Grounded in the Module 2 13 LVTTL-O Mod_NR Module Not Ready; Indicating Module Operational Fault 2 14 LVTTL-O RX_LOS Receiver Loss Of Signal Indicator 2 15 GND Module Ground 1 16 GND Module Ground 1 17 CML-O RD- Receiver Inverted Data Output 18 CML-O RD+ Receiver Non-Inverted Data Output 19 GND Module Ground 1 20 Vcc2 +1.8V Power Supply 21 LVTTL-I P_Down/RST Power Down; When high, requires the module to limit power consumption to 1.5W or below. 2-Wire serial interface must be functional in the low power mode. Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle. 22 Vcc2 +1.8V Power Supply 23 GND Module Ground 1 24 PECL-I RefCLK+ Reference Clock Non-Inverted Input, AC coupled on the host board 25 PECL-I RefCLK- Reference Clock Inverted Input, AC coupled on the host board 26 GND Module Ground 1 27 GND Module Ground 1 28 CML-I TD- Transmitter Inverted Data Input 29 CML-I TD+ Transmitter Non-Inverted Data Input 20 GND Module Ground 1 Pin Out Definition Notes: 1. Module ground pins GND are isolated from the module case and chassis ground within the module. 2. Shall be pulled up with 4.7k-10kohms to a voltage between 3.15V and 3.45V on the host board. |
Similar Part No. - XPD-MR-04-46CDA |
|
Similar Description - XPD-MR-04-46CDA |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |