Electronic Components Datasheet Search |
|
D124ER Datasheet(PDF) 2 Page - MicroPower Direct, LLC |
|
D124ER Datasheet(HTML) 2 Page - MicroPower Direct, LLC |
2 / 2 page Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.01 (±0.25) • Pin 1 is marked by a “dot” or indentation on the side of the unit Model Number Input Output Efficiency (%, Typ) Fuse Rating Slow-Blow (mA) Voltage (VDC) Current (mA) Voltage (VDC) Current (mA, Max) Current (mA, Min) Nominal Range Full-Load No-Load D101ER 5 4.75 - 5.25 294 30 5.0 200.0 20.0 68 500 D102ER 5 4.75 - 5.25 286 30 9.0 111.0 12.0 70 500 D103ER 5 4.75 - 5.25 282 30 12.0 83.0 9.0 71 500 D104ER 5 4.75 - 5.25 278 30 15.0 67.0 7.0 72 500 D105ER 5 4.75 - 5.25 290 30 ±5.0 ±100.0 ±10.0 69 500 D106ER 5 4.75 - 5.25 286 30 ±9.0 ±56.0 ±6.0 70 500 D107ER 5 4.75 - 5.25 278 30 ±12.0 ±42.0 ±5.0 72 500 D108ER 5 4.75 - 5.25 278 30 ±15.0 ±33.0 ±4.0 72 500 D111ER 12 11.4 - 12.6 121 15 5.0 150.0 15.0 69 200 D112ER 12 11.4 - 12.6 117 15 9.0 111.0 12.0 71 200 D113ER 12 11.4 - 12.6 116 15 12.0 83.0 9.0 72 200 D114ER 12 11.4 - 12.6 116 15 15.0 67.0 7.0 72 200 D115ER 12 11.4 - 12.6 119 15 ±5.0 ±100.0 ±10.0 70 200 D116ER 12 11.4 - 12.6 116 15 ±9.0 ±56.0 ±6.0 72 200 D117ER 12 11.4 - 12.6 114 15 ±12.0 ±42.0 ±5.0 73 200 D118ER 12 11.4 - 12.6 114 15 ±15.0 ±33.0 ±4.0 73 200 D121ER 24 22.8 - 25.2 59 8 5.0 150.0 15.0 70 100 D122ER 24 22.8 - 25.2 58 8 9.0 111.0 12.0 72 100 D123ER 24 22.8 - 25.2 57 8 12.0 83.0 9.0 73 100 D124ER 24 22.8 - 25.2 57 8 15.0 67.0 7.0 73 100 D125ER 24 22.8 - 25.2 58 8 ±5.0 ±100.0 ±10.0 72 100 D126ER 24 22.8 - 25.2 58 8 ±9.0 ±56.0 ±6.0 72 100 D127ER 24 22.8 - 25.2 57 8 ±12.0 ±42.0 ±5.0 73 100 D128ER 24 22.8 - 25.2 57 8 ±15.0 ±33.0 ±4.0 73 100 Pin Single Dual 1 +Vin +Vin 2 -Vin -Vin 4 -Vout No Pin 6 +Vout No Pin 7 No Pin +Vout 9 No Pin -Vout 10 No Pin Common Derating Curve Notes: 1. Output load regulation is specified for a load change of 10% to 100%. 2. These units should not be operated with a load under 10% of full load. Operation at no-load may cause damage to the unit. 3. These converters will operate without external components. However, when measuring output ripple, it is recommended that an external ceramic capaci- tor be placed from the +Vout pin to the -Vout pin for single output units and from each output to common for dual output units. An input capacitor will enhace stability over temperature and input line variations. Recommended capaci- tor values are given in the table at right. For applications requir- ing very low output noise levels, a simple LC filter should be effective. 4. It is recommended that a fuse be used on the input of a power supply for protection. See the Model Selection table above for the correct rating. Vin Input Capacitor Vout Output Capacitor Single Dual 5 VDC 4.7 μF 5 VDC 10.0 μF 4.7 μF 12 VDC 2.2 μF 9 VDC 4.7 μF 2.2 μF 24 VDC 1.0 μF 12 VDC 2.2 μF 1.0 μF 15 VDC 1.0 μF 0.47 μF Model Selection Guide Mechanical Dimensions (Single Output) Pin Connections Mechanical Dimensions (Dual Output) Notes: • All dimen • Tolerance • Pin 1 is ma on the sid MicroPower Direct www.micropowerdirect.com 292 Page Street, STE D, Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com |
Similar Part No. - D124ER |
|
Similar Description - D124ER |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |