COMMUNICATIONS MODULES & SUBSYSTEMS

Key Features

• 850 nm, up to 300 m over multimode fiber (MMF)

• 10.3125 Gb/s data rate (Ethernet); 10.51875 Gb/s (Fibre Channel)

• 4-bit XAUI differential AC-coupled electrical interface

• Positive power supply operation (1.8 V, 3.3 V)

• 2.8 W typical, 3.6 W maximum

• Low power mode

• Digital diagnostic monitoring

• Single-mode duplex SC optical connector

The JDSU 10GBASE-SR X2 Transceiver is an integrated fiber optic transceiver

that provides a high-speed serial link at a signaling rate of 10.3125 Gb/s for

Ethernet and 10.51875 Gb/s for Fibre Channel. This product complies with the

IEEE 802.3ae 10GBASE-SR standard, the 10G Fibre Channel standard, and the X2

Transceiver Multi-Source Agreement (MSA) (Rev 2.0b).

The transceiver uses a short wavelength (850 nm) VCSEL that enables data

transmission over multi-mode fiber at distances of up to 300 m. This module

features a 4-bit XAUI differential hot-pluggable electrical interface and accepts an

industry standard duplex SC optical connector.

Digital diagnostic monitoring (DDM) is implemented and fully compliant with

X2 DDM architecture. The unit monitors temperature, receive optical power,

transmit optical power, and laser bias current.

Support for longer distances is available. Contact your JDSU Sales Representative.

Applications

• Local Area Networks (LAN)

• Storage Area Networks (SAN)

• Ethernet switches and applications

• Fibre Channel switches and applications

Compliance

• IEEE 802.3ae standard

• 10GFC standard

• X2 MSA Revision 2.0b

• Tested in accordance with Telcordia

GR-468

• Class 1 laser safety

• UL and TUV certified

10GBASE-SR X2 Optical Transceiver

JX2 Series

NORTH AMERICA

WEBSITE

WORLDWIDE