FTR-1621-XX WDM GBIC

Product Specification - March 2002

F i n i s a r

© Finisar Corporation 01-Mar-02 Rev.F

Page 9

X.

References

1.

Company et. al., August 16, 1999. http://playground.sun.com/pub/OEmod/

2.

“Fibre Channel Physical and Signaling Interface (FC-PH, FC-PH2, FC-PH3)”.

American National Standard for Information Systems.

3.

Bellcore GR-253 and ITU-T G.957 Specifications (Transmitter Optical Output

4.

“Application Note AN-2030: Digital Diagnostic Monitoring Interface

for Optical Transceivers”, Finisar Corporation, April 2002.

5.

www.Atmel.com

(*) Neither GBIC, FC-PH, nor IEEE802.3 specifies a 14xx/15xx/16xx nm single mode

interface. The FTR-1621-XX complies with these specifications except for the following

optical parameters: laser wavelength, receiver sensitivity, and transmit output power. See

Table 6 for details.

(**) The FTR-1621-XX optical interface is not fully SONET/SDH compliant. Please see

Table 6.

XI. For More Information

Finisar Corporation

1308 Moffett Park Drive

Sunnyvale, CA 94089-1133

Tel. (408) 548-1000

Fax (408) 541-6138

sales@finisar.com

www.finisar.com