Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.COM

X  

LTC4245CUHF Datasheet(PDF) 9 Page - Linear Technology

Part # LTC4245CUHF
Description  Multiple Supply Hot Swap Controller with I2C Compatible Monitoring
Download  36 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  LINER [Linear Technology]
Direct Link  http://www.linear.com
Logo LINER - Linear Technology

LTC4245CUHF Datasheet(HTML) 9 Page - Linear Technology

Back Button LTC4245CUHF Datasheet HTML 5Page - Linear Technology LTC4245CUHF Datasheet HTML 6Page - Linear Technology LTC4245CUHF Datasheet HTML 7Page - Linear Technology LTC4245CUHF Datasheet HTML 8Page - Linear Technology LTC4245CUHF Datasheet HTML 9Page - Linear Technology LTC4245CUHF Datasheet HTML 10Page - Linear Technology LTC4245CUHF Datasheet HTML 11Page - Linear Technology LTC4245CUHF Datasheet HTML 12Page - Linear Technology LTC4245CUHF Datasheet HTML 13Page - Linear Technology Next Button
Zoom Inzoom in Zoom Outzoom out
 9 / 36 page
background image
LTC4245
9
4245fa
PI FU CTIO S
12VGATE: Gate Drive for 12V Supply External N-Channel
MOSFET. An internal 20μA current source charges the gate
of the external N-channel MOSFET. An internal clamp limits
the gate voltage to 6.2V above 12VOUT. During turn-off a
1.3mA pull-down current discharges 12VGATE to ground.
During short-circuit a 250mA pull-down current between
12VGATE and 12VOUT is activated.
12VIN: 12V Supply, Current Sense and ADC Input. The
internal low voltage supply VCC is generated from 12VIN.
An undervoltage lockout circuit, with 38mV hysteresis,
prevents any external MOSFET from turning on when this
pin is below 10.5V.
12VOUT: 12V Gate Drive Return; Foldback, ADC and Power
Bad Input. Connect this pin to the source of the 12V supply
external N-channel MOSFET switch for gate drive return.
Power is considered bad if this pin drops below 11.1V. The
comparator on this pin has a built-in hysteresis of 40mV.
This pin is also an input to the ADC and the current limit
foldback circuit. A 1000Ω active pull-down discharges
12VOUT to ground when the external MOSFET is turned
off.
12VSENSE: 12V Supply Current Sense and ADC Input.
Connect this pin to the output of the 12V current sense
resistor. The current limit circuit controls the 12VGATE pin
to limit the sense voltage between the 12VIN and 12VSENSE
pins to 50mV or less during start-up and 150mV thereafter.
During start-up a foldback feature reduces the current
limit to 15mV as the 12VOUT pin approaches ground. A
circuit breaker, enabled after start-up, trips when the sense
voltage exceeds 50mV for 22μs. To disable current limit,
connect this pin to 12VIN.
3VGATE: Gate Drive for 3.3V Supply External N-Channel
MOSFET. An internal 20μA current source charges the gate
of the external N-channel MOSFET. An internal clamp limits
the gate voltage to 6.2V above 3VOUT. During turn-off a
1.3mA pull-down current discharges 3VGATE to ground.
During short-circuit a 310mA pull-down current between
3VGATE and 3VOUT is activated.
3VIN: 3.3V Supply, Current Sense and ADC Input. The 1V
precharge circuit draws its power and reference voltage
from 3VIN. An undervoltage lockout circuit, with 10mV
hysteresis, prevents any external MOSFET from turning
on when this pin is below 2.8V.
3VOUT: 3.3V Gate Drive Return; Foldback, ADC and Power
Bad Input. Connect this pin to the source of the 3.3V supply
external N-channel MOSFET switch for gate drive return.
Power is considered bad if this pin drops below 2.9V. The
comparator on this pin has a built-in hysteresis of 11mV.
This pin is also an input to the ADC and the current limit
foldback circuit. A 190Ω active pull-down discharges 3VOUT
to ground when the external MOSFET is turned off.
3VSENSE: 3.3V Supply Current Sense and ADC Input.
Connect this pin to the output of the 3.3V current sense
resistor. The current limit circuit controls the 3VGATE pin
to limit the sense voltage between the 3VIN and 3VSENSE
pins to 25mV or less during start-up and 75mV thereafter.
During start-up a foldback feature reduces the current
limit to 7.5mV as the 3VOUT pin approaches ground. A
circuit breaker, enabled after start-up, trips when the sense
voltage exceeds 25mV for 22μs. To disable current limit,
connect this pin to 3VIN.
5VGATE: Gate Drive for 5V Supply External N-Channel MOS-
FET. An internal 20μA current source charges the gate of
the external N-channel MOSFET. An internal clamp limits
the gate voltage to 6.2V above 5VOUT. During turn-off a
1.3mA pull-down current discharges 5VGATE to ground.
During short-circuit a 250mA pull-down current between
5VGATE and 5VOUT is activated.
5VIN: 5V Supply, Current Sense and ADC Input. An under-
voltage lockout circuit, with 16mV or 10mV of hysteresis,
prevents any external MOSFET from turning on when this
pin is below 4.38V or 2.8V depending on the state of the
CFG pin.


Similar Part No. - LTC4245CUHF

ManufacturerPart #DatasheetDescription
logo
Linear Technology
LTC4245 LINER-LTC4245 Datasheet
278Kb / 24P
   Dual Supply Hot Swap Controller for Advanced Mezzanine Card
LTC4245 LINER-LTC4245_15 Datasheet
437Kb / 36P
   Multiple Supply Hot Swap Controller with I2C Compatible Monitoring
More results

Similar Description - LTC4245CUHF

ManufacturerPart #DatasheetDescription
logo
Linear Technology
LTC4245 LINER-LTC4245_15 Datasheet
437Kb / 36P
   Multiple Supply Hot Swap Controller with I2C Compatible Monitoring
LTC4215-3 LINER-LTC4215-3_15 Datasheet
317Kb / 28P
   Hot Swap Controller with I2C Compatible Monitoring
LTC4215-2 LINER-LTC4215-2_15 Datasheet
271Kb / 28P
   Hot Swap Controller with I2C Compatible Monitoring
LTC4215-1 LINER-LTC4215-1_15 Datasheet
317Kb / 28P
   Hot Swap Controller with I2C Compatible Monitoring
LTC4215 LINER-LTC4215_15 Datasheet
271Kb / 28P
   Hot Swap Controller with I2C Compatible Monitoring
LTC4280 LINER-LTC4280_15 Datasheet
296Kb / 28P
   Hot Swap Controller with I2C Compatible Monitoring
LTC4215 LINER-LTC4215 Datasheet
350Kb / 24P
   Hot Swap Controller with I2C Compatible Monitoring
LTC4215-1 LINER-LTC4215-1 Datasheet
311Kb / 28P
   Hot Swap Controller with I2C Compatible Monitoring
LTC4215CUFD-2 LINER-LTC4215CUFD-2 Datasheet
271Kb / 28P
   Hot Swap Controller with I2C Compatible Monitoring
LTC4280 LINER-LTC4280 Datasheet
292Kb / 28P
   Hot Swap Controller with I2C Compatible Monitoring
More results


Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36


Datasheet Download

Go To PDF Page


Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com