Electronic Components Datasheet Search |
|
FBA1J4BTTE121P Datasheet(PDF) 3 Page - KOA Speer Electronics, Inc. |
|
FBA1J4BTTE121P Datasheet(HTML) 3 Page - KOA Speer Electronics, Inc. |
3 / 3 page 260 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 3/01/07 FBA ferrite bead array environmental applications (continued) Performance Characteristics Parameter Terminal Strength (hanging test) Appearance: The terminal electrode shall not break off, nor shall there be damage to the body. Type: W(kgf): Time: 1206 1.5 30 seconds ± 2 seconds Terminal Strength (push test) Appearance: There shall be no evidence of mechanical degradations to terminals or body. Type: W(kgf): Time: 1206 2.3 60 seconds Solvent Resistance Change in Impedance: Relative to value before test ±10% Cleaning by: Washer: Ultrasonic washer (100W) Solvent: Isopropyl alcohol Time: 3 minutes Insulation Resistance Insulation Resistance: Min. 1G ohms Requirement Test Method Bending Strength Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value before test ±10% Board: 90 x 40 x 1.6mm Bend: 1mm Time: 5 sec Mechanical Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value before test ±10% Force: 50G Time: 11 msec There shall be 3 shocks in each of 6 directions (18 shocks total) Vibration Impedance: Relative to initial value ±10% Only endurance conditioning by sweeping shall be made. The entire frequency range from 10 - 2,000 Hz, return to 10 Hz in 20 minutes (this will constitute one cycle). Amplitude: 15G The test shall have a 15G peak and shall be applied for a period of 4 hours (12 cycles) in each of 3 mutually perpendicular directions (a total of 36 cycles within a total of 12 hours). Thermal Shock Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value ±20% DCR: The DCR shall not exceed initial specified value. Testing of the parts will be made at 0 hours, 250 hours and 500 hours. Before testing, the parts shall be allowed to cool to room temperature for 24 hours. Step: Temperature: Time: 1-start -40°C ± 2°C — 2-hold -40°C ± 2°C 30 minutes ± 5 minutes 3-transfer — 0.5 minutes maximum 4-hold ±105°C ± 2°C 30 minutes ± 5 minutes 5-transfer — 0.5 minutes maximum Steps 1 thru 5 constitute one complete cycle and the test shall consist of a total of 500 cycles. Load Humidity Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value ±15% Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. Temperature: ±85°C ± 2°C Relative Humidity: 85% Time: 1,000 hours total Apply: 100% rated current Life Test Appearance: There shall be no physical or mechanical damage. Impedance: Relative to initial value ±15% Measurements shall be taken at 0 hours, 250 hours, 500 hours and 1,000 hours and shall meet the conditions stated above. Temperature: ±85°C ± 2°C Time: 1,000 hours total Apply: 100% rated current 1733 Reader's Spreadspg189-328:1570 Reader's Spreadspg189-328 1/27/09 4:59 PM Page 65 |
Similar Part No. - FBA1J4BTTE121P |
|
Similar Description - FBA1J4BTTE121P |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |