Electronic Components Datasheet Search |
|
SAF7115ET Datasheet(PDF) 2 Page - NXP Semiconductors |
|
SAF7115ET Datasheet(HTML) 2 Page - NXP Semiconductors |
2 / 35 page SAF7115_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 15 October 2008 2 of 35 NXP Semiconductors SAF7115 Multistandard video decoder The SAF7115 incorporates a frame locked audio clock generation. This function ensures that there is always the same number of audio samples associated with a frame, or a set of fields. This prevents the loss of synchronization between video and audio, during capture or playback. Furthermore, there is an option to use a second analog onboard PLL to enhance this audio clock to a low jitter frame locked audio clock. The SAF7115 is controlled through the I2C-bus with full write/read capability for all programming registers and a bit-rate of up to 400 kbit/s. See Ref. 1 for a detailed register description, pin strapping and applications. 2. Features 2.1 Video acquisition I Six analog inputs, internal analog source selectors, e.g. (6 × CVBS) or (2 × Y/C and 2 × CVBS) or (1 × Y/C and 4 × CVBS) I Two differential (bi-phase) video inputs as an alternative I Two built-in analog anti-alias filters I Two improved 9-bit CMOS ADCs in differential CMOS style at two-fold ITU-656 oversampling (27 MHz) I Fully programmable static gain or Automatic Gain Control (AGC) for the selected CVBS or Y/C channel I Automatic Clamp Control (ACC) for CVBS, Y and C I Switchable white peak control. Two 9-bit video CMOS ADCs, digitized CVBS or Y/C I Signals are available on the expansion port (X-port) I Requires only one crystal (32.11 MHz or 24.576 MHz) for all standards I Independent gain and offset adjustments for raw data path 2.2 Comb filter video decoder I Digital PLL for synchronization and clock generation from all standard and non-standard video sources e.g. consumer grade Video Tape Recorders (VTR) I Automatic detection of 50 Hz and 60 Hz field frequencies I Automatic recognition of all common broadcast standards I Enhanced horizontal and vertical sync detection I Luminance and chrominance signal processing for: N PAL BGDHIN N Combination-PAL N N PAL M N NTSC M N NTSC-Japan N NTSC 4.43 N SECAM (50 Hz/60 Hz) I PAL delay line for correcting PAL phase errors I Improved 2/4-line comb filter for two dimensional chrominance/luminance-separation operating with adaptive comb filter parameters. N Increased luminance and chrominance bandwidth for all PAL and NTSC-standards N Reduced cross color and cross luminance artefacts |
Similar Part No. - SAF7115ET |
|
Similar Description - SAF7115ET |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |