CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com

Low Profile SMT Aluminum Electrolytic Capacitors

Specifications

–55 °C to +105 °C

6.3, 10, 16, 25, 35, 50 Vdc

±20% @ 120 Hz and +20 °C

I = 0.01 CV or 3 (µA) whichever is greater after 2 minutes

C = rated capacitance in µF, V = rated DC working voltage

For Filtering, Bypassing and Power Supply Decoupling

Highlights

• +105 °C, Up to 1000 Hours Load Life

• Capacitance Range: 0.1 µF to 100 µF

• Voltage Range: 6.3 Vdc to 50 Vdc

Operating Temperature:

Rated Voltage:

Capacitance:

Capacitance Tolerance:

Leakage Current:

Ripple Current Multiplier:

Dissipation Factor:

(Tan

δ at 120 Hz, 20 ºC)

Low Temperature

Characteristic (at 120 Hz):

Shelf LifeTest:

Type AVES Capacitors are rated for 1000 hours at 105 ºC with low

impedance characteristics. They are ideal for high density PC board

packaging. The Type AVES offers a low in-place-cost for a high

quality performer. The vertical cylindrical cases facilitate automatic

mounting and reflow soldering into the same footprint of like-rated

tantalum capacitors except without the need for voltage derating. Type

AVES is RoHS compliant.

Load Life Test:

Test time: 1000 hours; other items are the same as those for life test.

Freq. (Hz)

Vdc

50, 60

120

1 k

10 k up

Under 16

0.8

1.00

1.15

1.25

25 ~ 35

0.8

1.00

1.25

1.40

50

0.8

1.00

1.35

1.50

Rated Voltage

6.3

10

16

25

35

50

Tan δ Max

0.30

0.26

0.22

0.16

0.13

0.12

Rated Voltage

6.3

10

16

25

35

50

Impedance

Ratio

Z(–25 ºC) / Z(+20 ºC)

4

3

2

2

2

2

Z(–40 ºC) / Z(+20 ºC)

8

5

4

3

3

3

Test Time

1,000 Hours

Capacitance Change

Within ±20% of initial value

Dissipation Factor

Less than 200% of specified value

Leakage Current

Within specified value

* The above specifications shall be satisfied when the

capacitors are restored to 20 ºC after the rated voltage is

applied for 1,000 hrs at 105 ºC

Complies with the EU Directive

2002/95/EC requirement restricting

the use of Lead (Pb), Mercury (Hg),

Cadmium (Cd), Hexavalent chromium

(Cr(VI)), PolyBrominated Biphenyls

(PBB) and PolyBrominated Diphenyl

Ethers (PBDE).