ABSOLUTE MAXIMUM RATINGS

(1)

PGA112

,, PGA113

PGA116, PGA117

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

PACKAGE AND MODEL COMPARISON

SHUTDOWN

# OF MUX

GAINS

SPI

DEVICE

INPUTS

(Eight Each)

DAISY-CHAIN

HARDWARE

SOFTWARE

PACKAGE

PGA112

Two

Binary

No

No

ü

MSOP-10

PGA113

Two

Scope

No

No

ü

MSOP-10

PGA116

10

Binary

ü

ü

ü

TSSOP-20

PGA117

10

Scope

ü

ü

ü

TSSOP-20

DESCRIPTION

PACKAGE

PACKAGE

PRODUCT

(Gains/Channels)

PACKAGE-LEAD

DESIGNATOR

MARKING

PGA112

MSOP-10

DGS

P112

PGA113

MSOP-10

DGS

P113

TSSOP-20

PW

PGA116

TSSOP-20

PW

PGA117

(1)

For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2)

Binary gains: 1, 2, 4, 8, 16, 32, 64, and 128.

(3)

Scope gains: 1, 2, 5, 10, 20, 50, 100, and 200.

(4)

Available Q3 2008.

Over operating free-air temperature range, unless otherwise noted.

PGA112, PGA113, PGA116, PGA117

UNIT

Supply Voltage

+7

V

V

±10

mA

Output Short-Circuit

Continuous

Operating Temperature

–40 to +125

°C

Storage Temperature

–65 to +150

°C

Junction Temperature

+150

°C

Human Body Model (HBM)

3000

V

ESD Ratings:

Charged Device Model (CDM)

1000

V

Machine Model (MM)

300

V

(1)

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond

those specified is not implied.

(2)

Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should

be current limited to 10mA or less.

2

Submit Documentation Feedback

Copyright © 2008, Texas Instruments Incorporated

Product Folder Link(s): PGA112 PGA113