Electronic Components Datasheet Search
  English  ▼

Delete All


Preview PDF Download HTML

PSPRL9802 Datasheet(PDF) 1 Page - Wall Industries,Inc.

Part No. PSPRL9802
Description  Active PFC 200 Watt Single Output AC/DC Switching Power Supply
Download  3 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  WALL [Wall Industries,Inc.]
Homepage  http://www.wallindustries.com

PSPRL9802 Datasheet(HTML) 1 Page - Wall Industries,Inc.

Zoom Inzoom in Zoom Outzoom out
 1 / 3 page
background image
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPRL9802 Series
Active PFC
200 Watt Single Output
AC/DC Switching Power Supply
● 2 Year Warranty
● Optional Top Cover
● 90 ~ 264VAC Universal AC Input
● Approved to UL CUL TUV CE and CB
● Power Factor Corrected to EN61000-3-2 Class D
● Compact 1U Size & Power Density: 5.2 Watts/cu in.
● Providing Peak Power 600W within 500uS Duty Duration
● Convection-Cooled and with Forced Air Cooling Rating Options
● Protections: Short Circuit/ Over Load/ Over Voltage/ Over Temp
All specifications are based on 25
oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
Input Voltage
90 – 264VAC Full Range
Input Frequency
47 to 63Hz
Input Current
4A at 100VAC full load
Inrush Current
35A max @ 110VAC with full load and cold start.
Leakage Current
1.5mA max @ 240VAC
Remote ON/OFF
Designated as REMO on the CN3, requires a low signal to inhibit output. Hiccup mode.
Output Voltage
See Table
Output Power Range
200 Watts max.
Output Adjustability
Output user adjustable ±5% minimum.
Total Regulation
Output Current
See Table
Ripple & Noise (peak to peak)
See Table
Transient Response
Output voltage returns to within 1% in less than 500µs for a 50% dynamic load, peak does not excess 5%.
Hold-Up Time
20ms min. at 80% of full load.
Turn-on/off not exceed 5% over nominal voltage.
Turn On Delay
1 second maximum at 120VAC.
Remote Sense
Designated as RS+ and RS- on the CN3
Over Voltage Protection
Latching down will occur when output voltage exceeds 130% and recycle AC input to reset.
Short Circuit Protection
Trip without damage and auto-recovery.
Over-Temperature Protection
Protected in the event of excessive operating ambient 85°C and automatic recovery.
Over-Power Protection
Hiccup mode 110-140%; auto-recovery.
Input Circuit Protection
A protected 250V/5A fuse inserted.
70% for 3.3V, 75% for 5V, 80% for 12V, and 83% minimum for other outputs @ 230VAC and full load.
Withstand Voltage
1500 VAC input line to chassis (10mA DC cut off current, isolating 3000VAC primary to secondary
windings. Primary to core 1500VAC. All for 3 seconds.
Burn In
45 ±5°C for one hour @ 230VAC with full load.
Active power factor correction meets EN61000-3-2 class D.
Power Good
Designated as PG on the CN3 will go high 100-500ms after regulation and goes low 1ms before loss of
Power Supply On
Green LED designated as LED 1 on the PCB.
Grounding Test
Apply 25A from ground pin of the three-prong plug to the far most earth. Max allowable resistance 0.1 ohm.

Html Pages

1  2  3 

Datasheet Download

Link URL

Privacy Policy
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com

Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn