Electronic Components Datasheet Search |
|
W68-X2Q12-20 Datasheet(PDF) 1 Page - Tyco Electronics |
|
W68-X2Q12-20 Datasheet(HTML) 1 Page - Tyco Electronics |
1 / 6 page Features • Designed for the international market. UL Recognized, CSA Certified, and VDE approved. • Ratings to 50 amps. • Heavy duty #10-32 stud connections. (W9) • Optional 10 amp auxiliary switch. • Optional snap-in mounting. (W6) • Several delay curve options. • Trip-free operation. Agency Approvals UL: Recognized as Supplementary Protector under UL 1077. File E69543. CSA: Certified as a Supplementary Protector. File LR15734. VDE: Approved to VDE 0642/EN 60 934 (Circuit Breakers for Equipment) License No. 73782. Mechanical/Environmental Data Operating Temperature: -40°C to +85°C. Humidity: Meets requirements of Mil-STD-202 method 103. Shock: Tested per Mil-STD-202, method 213, test condition C (100g @ 6 ms). Vibration:Tested per Mil-STD-202, method 201, 10-55 Hz., 0.06" (1.52mm) total excursion in 2 planes. Fungus And Moisture Resistance: Special moisture resistant finish applied to all ferrous parts. Plastic parts are made of inherently fungus resistant material. Marking: W6 units have ON and OFF molded on the rocker of rocker actuated units (rocker actuated VDE units have international “1” and “0”). W9 units have ON and OFF molded into the area at the base of the toggle. International “1” and “0” symbols are marked on the toggle for both W6 and W9. Mounting: Panel mounted units are mounted with two #6-32 screws from the front of the panel. Metric models for use with M3 x 0.5 screws are available. Units with snap-in mounting option snap through the front of the panel. To maintain published performance specifications, units should not be mounted more than 90° from their normal upright position. Weight: Approximately 2.5 ounces per pole. W6/W9 series Magnetic Hydraulic Circuit Breakers Electrical Data Auxiliary Switch: See Auxiliary Switch Ratings Table 2 for details. Calibration: Breakers will hold 100% of rated current. Breakers may trip between 101% and 124% of rated load (149% for 400 Hz. units and 134% for AC/DC units). Breakers must trip at 125% of rated load and above (150% for 400 Hz. units and 135% for AC/DC units). Dielectric Strength: 50/60 or 400 Hz., 1500V: DC, 1100V. Insulation Resistance: 100 Megohms at 500VDC. Endurance: 10,000 on/off cycles - 6000 at rated load, 4000 at no load. Units tested at six cycles per minute, 1 second on and 9 seconds off at 25°C ambient. Approvals and Ratings Table 1 Typical Resistance and Impedance DC 50/60 Hz. 400 Hz. Current Resistance Impedance Impedance (Amps) (Ohms) (Ohms) (Ohms) 0.2 90 90 180 1.0 1.2 1.2 2.0 2.0 0.28 0.28 0.50 5.0 0.04 0.04 0.05 10.0 0.013 0.013 0.025 20.0 0.004 0.005 0.0065 30.0 0.0027 0.004 0.004 40.0 0.002 0.002 0.003 50.0 0.0015 0.0015 0.0025 Tolerance: 0.1 - 4.99 ± 15%; 5 - 9.99 ± 20%; 10 - 15 ± 25%; 16 - 30 ± 50%. W9 Series UL/CSA (All Circuit Functions) W9 Series VDE (Circuit Function X) Current Interrupting Current Interrupting Maximum Frequency Phase Rating Capacity Maximum Frequency Phase Rating Capacity Voltage (Hz) (Amps) (Amps) Voltage (Hz) (Amps) (Amps) 65 DC - 0.2 - 50 2,000 65 DC - 0.2-50 2,000 277 50/60 1 0.2 - 50 5,000 250 50/60 1 0.2-30 5,000 277/480 50/60 3Ø-Wye 0.2 - 20 5,000 250 50/60 1 31-50 2,000 250 400 1 0.2 - 50 2,500 415/240 50/60 3Ø 0.2-30 5,000 250 400 3Ø-Wye 0.2 - 50 2,500 W6 Series UL/CSA (All Circuit Functions) W6 Series VDE (Circuit Function X) Current Interrupting Current Interrupting Maximum Frequency Phase Rating Capacity Maximum Frequency Phase Rating Capacity Voltage (Hz) (Amps) (Amps) Voltage (Hz) (Amps) (Amps) 65 DC - 0.2 - 50 2,000 65 DC - 0.2-50 2,000 277 50/60 1 0.2 - 20 5,000 250 50/60 1 0.2-30 5,000 277 50/60 1 21 - 50 2,500 250 50/60 1 31-50 2,000 277/480 50/60 3Ø-Wye 0.2 - 20 5,000 415/240 50/60 3Ø 0.2-30 5,000 250 400 1 0.2 - 20 2,500 250 400 1 21 - 50 1,250 250 400 3Ø-Wye 0.2 - 20 2,500 Approvals and Ratings Table 2 UL/CSA VDE Switch Voltage Current Terminals Switch Voltage Current Terminals Number 50/60 Hz. (Amps) WxTxL Number 50/60 Hz. (Amps) WxTxL A 125 10 .093 x .020 x .250 V1 250 10 .110 x .020 x .280 (2.36 x .51 x 6.40) V2 250 5 (2.79 x .51 x 7.11) V3 250 0.1 |
Similar Part No. - W68-X2Q12-20 |
|
Similar Description - W68-X2Q12-20 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |