Electronic Components Datasheet Search |
|
RT9169-13GX Datasheet(PDF) 3 Page - Richtek Technology Corporation |
|
RT9169-13GX Datasheet(HTML) 3 Page - Richtek Technology Corporation |
3 / 9 page RT9169/H 3 DS9169/H-12 March 2007 www.richtek.com Electrical Characteristics (VIN = 5.5V, CIN = 1 μF, COUT = 1μF, TA = 25°C, unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Units Input Voltage Range VIN 2 -- 6 V Output Voltage Accuracy ΔVOUT IL = 1mA -2 -- +2 % Maximum Output Current IMAX VIN = VOUT + 0.6V, VIN ≥ 3.6V 100 -- -- mA Current Limit ILIM IL = 100mA 150 250 -- mA No Load -- 4 7 μA GND Pin Current IG IOUT = 100mA 4 10 μA IOUT = 1mA, VIN ≥ 3.6V -- 4 10 IOUT = 50mA, VIN ≥ 3.6V -- 200 300 Dropout Voltage VDROP IOUT = 100mA, VIN ≥ 3.6V -- 450 600 mV Line Regulation ΔVLINE VIN = (VOUT + 0.3V) to 6V, VIN ≥ 3.6V, IOUT = 1mA -0.2 -- +0.2 %/V Load Regulation ΔVLOAD ILOUT = 0mA to 100mA -- 0.01 0.04 %/mA Output Noise eNO BW = 100Hz to 50kHz COUT = 10μF -- 250 -- μV Ripple Rejection PSRR F = 1kHz, COUT = 1μF -- 30 -- dB Standby Current RT9169/H (SOT-23-5) EN = VIN or EN = 0 -- 0.1 1 μA Logic High VIL 0.6 -- -- EN/EN Threshold Logic Low VIH -- -- 2 V Thermal Shutdown Protection 125 -- -- °C Application Information A 1 μF (or larger) capacitor is recommended between VOUT and GND for stability. The part may oscillate without the capacitor. Any type of capacitor can be used, but not Aluminum electrolytes when operating below –25 °C. The capacitance may be increased without limit. A 1 μF capacitor (or larger) should be placed between VIN to GND. Note 1. Stresses listed as the above "Absolute Maximum Ratings" may cause permanent damage to the device. These are for stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may remain possibility to affect device reliability. Note 2. Devices are ESD sensitive. Handling precaution is highly recommended. Note 3. The device is not guaranteed to function outside its operating conditions. Note 4. θJA is measured in the natural convection at TA = 25°C on a low effective thermal conductivity test board of JEDEC 51-3 thermal measurement standard. |
Similar Part No. - RT9169-13GX |
|
Similar Description - RT9169-13GX |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |