![]() |
Electronic Components Datasheet Search |
|
HMC625LP5 Datasheet(PDF) 5 Page - Hittite Microwave Corporation |
|
HMC625LP5 Datasheet(HTML) 5 Page - Hittite Microwave Corporation |
5 / 10 page ![]() 14 - 6 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 14 Absolute Maximum Ratings RF Input Power [1] 11.5 dBm (T = 85 °C) Digital Inputs (Reset, Shift Clock, Latch Enable & Serial Input) -1.5V to (Vdd +1.5V) Vdc Bias Voltage (Vdd) 5.6 Vdc Collector Bias Voltage (Vcc) 5.5 Vdc Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 8.5 mW/°C above 85 °C) [1] 0.549 W Thermal Resistance 118 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C [1] At max gain settling ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Bias Voltage Vdd (Vdc) Idd (Typ.) (mA) 5V 2 Vs (V) Is (Typ.) (mA) 5V 86 Parallel PUP Truth Table P/S LE PUP2 PUP1 Gain Relative to Maximum Gain 0000 -31.5 0010 -24 0001 -16 0011 -8 0 1 X X -0.5 to -31.5 dB Note: Power-Up with LE= 1 provides normal parallel operation with D0 - D5, and PUP1 and PUP2 are not active. Power-Up States Using the Parallel PUP truth table the attenuator can be turned on at a specific attenuation state. By using the PUP1 and PUP2 line four different attenuation states can be selected. It can also be used in the Direct Parallel Mode using the Control Voltage Inputs to select attenuation values. HMC625LP5 / 625LP5E v01.0907 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 6 GHz Control Voltage Input Gain Relative to Maximum Gain D5 D4 D3 D2 D1 D0 High High High High High High 0 dB High High High High High Low -0.5 dB High High High High Low High -1 dB High High High Low High High -2 dB High High Low High High High -4 dB High Low High High High High -8 dB Low High High High High High -16 dB Low Low Low Low Low Low -31.5 dB Any combination of the above states will provide a reduction in gain approximately equal to the sum of the bits selected. Truth Table TTL/CMOS Control Voltage State Vdd= +3V or +5V Low 0 to 0.8V High 2.0V to Vdd |