STM32F103C6 datasheet(1/67 Pages) STMICROELECTRONICS

Part #	STM32F103C6

Description	Performance line, ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers, two ADCs and nine communication interfaces

Download	67 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

1 / 67 page

Preliminary Data

This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to

change without notice.

July 2007

Rev 2

1/67

1

STM32F103x6

STM32F103x8 STM32F103xB

Performance line, ARM-based 32-bit MCU with Flash, USB, CAN,

seven 16-bit timers, two ADCs and nine communication interfaces

Features

■

Core: ARM 32-bit Cortex™-M3 CPU

– 72 MHz, 90 DMIPS with 1.25 DMIPS/MHz

– Single-cycle multiplication and hardware

division

– Nested interrupt controller with 43

maskable interrupt channels

– Interrupt processing (down to 6 CPU

cycles) with tail chaining

■

Memories

– 32-to-128 Kbytes of Flash memory

– 6-to-20 Kbytes of SRAM

■

Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage

detector (PVD)

– 4-to-16 MHz quartz oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 32 kHz RC

– PLL for CPU clock

– Dedicated 32 kHz oscillator for RTC with

calibration

■

Low power

– Sleep, Stop and Standby modes

–VBAT supply for RTC and backup registers

■

2 x 12-bit, 1 µs A/D converters (16-channel)

– Conversion range: 0 to 3.6 V

– Dual-sample and hold capability

– Synchronizable with advanced control timer

– Temperature sensor

■

DMA

– 7-channel DMA controller

– Peripherals supported: timers, ADC, SPIs,

I2Cs and USARTs

■

Debug mode

– Serial wire debug (SWD) & JTAG interfaces

■

Up to 80 fast I/O ports

– 32/49/80 5 V-tolerant I/Os

– All mappable on 16 external interrupt

vectors

– Atomic read/modify/write operations

■

Up to 7 timers

– Up to three 16-bit timers, each with up to 4

IC/OC/PWM or pulse counter

– 16-bit, 6-channel advanced control timer:

up to 6 channels for PWM output

Dead time generation and emergency

stop

– 2 x 16-bit watchdog timers (Independent

and Window)

– SysTick timer: a 24-bit downcounter

■

Up to 9 communication interfaces

– Up to 2 x I2C interfaces (SMBus/PMBus)

– Up to 3 USARTs (ISO 7816 interface, LIN,

IrDA capability, modem control)

– Up to 2 SPIs (18 Mbit/s)

– CAN interface (2.0B Active)

– USB 2.0 full speed interface

Table 1.

Device summary

Reference

Root part number

STM32F103x6 STM32F103C6, STM32F103R6

STM32F103x8

STM32F103C8, STM32F103R8

STM32F103V8

STM32F103xB STM32F103RB STM32F103VB

LQFP64

10 x 10 mm

LQFP100

14 x 14 mm

LQFP48

7 x 7 mm

BGA100

10 x 10 mm

www.st.com

Similar Part No. - STM32F103C6

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	STM32F103C6	1Mb / 80P	Low-density performance line, ARM-based 32-bit MCU with 16 or 32 KB Flash, USB, CAN, 6 timers, 2 ADCs, 6 communication interfaces
	STM32F103C6	1Mb / 90P	Low-density performance line, ARM-based 32-bit MCU with 16 or32 KB Flash, USB
	STM32F103C6	1Mb / 90P	Low-density performance line, ARM-based 32-bit MCU with 16 or 32 KB Flash, USB, CAN, 6 timers, 2 ADCs, 6 com. interfaces May 2013 Rev 6
	STM32F103C6	140Kb / 6P	Leading-edge architecture with Cortex-M3 core 2007
	STM32F103C6H6ATR	1Mb / 80P	Low-density performance line, ARM-based 32-bit MCU with 16 or 32 KB Flash, USB, CAN, 6 timers, 2 ADCs, 6 communication interfaces

More results

Similar Description - STM32F103C6

Manufacturer	Part #	Datasheet	Description
STMicroelectronics	STM32F103X6	1Mb / 84P	Performance line, ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers, two ADCs and nine communication interfaces
	STM32F103X4	1Mb / 80P	Low-density performance line, ARM-based 32-bit MCU with 16 or 32 KB Flash, USB, CAN, 6 timers, 2 ADCs, 6 communication interfaces
	STM32F101X6	966Kb / 64P	Access line, advanced ARM-based 32-bit MCU with Flash memory, six 16-bit timers, ADC and seven communication interfaces
	STM32F101X6	1Mb / 74P	Access line, advanced ARM-based 32-bit MCU with Flash memory, six 16-bit timers, ADC and seven communication interfaces
	STM32F103XC	1Mb / 118P	Performance line, ARM-based 32-bit MCU with up to 512 KB Flash, USB, CAN, 11 timers, 3 ADCs and 13 communication interfaces
	STM32F103VDT6	1Mb / 130P	High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
	STM32F103XC	1Mb / 123P	High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
	STM32F103ZCH6	1Mb / 130P	High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
	STM32F103ZEH6	1Mb / 130P	High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces
	STM32F103RCT7	1Mb / 130P	High-density performance line ARM-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces

More results

STM32F103C6 Datasheet(PDF) 1 Page - STMicroelectronics

STM32F103C6 Datasheet(HTML) 1 Page - STMicroelectronics

Similar Part No. - STM32F103C6

Similar Description - STM32F103C6

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Datasheet Download

Link URL