Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200140 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • May 30, 2006

1

PIN Diode Chips Supplied on Film Frame

DATA SHEET

Features

●

Designed for high-performance switch and

attenuator applications

●

Preferred device for module applications

●

PIN diodes supplied 100% tested, sawn, mounted on film frame

●

Low cost

●

Available lead (Pb)-free, RoHS-compliant, and Green

Description

The SMP series of PIN diodes is designed for high-volume switch

applications from 10 MHz to beyond 2 GHz. The low current, low

capacitance performance of these diodes makes the SMP series

particularly suited for battery-operated circuits, power amplifier

modules, VCO, T/R switches and other applications. The

SMP1302-099 and SMP1304-099 parts are designed as low-

distortion attenuators used in TV distribution and cellular base

station applications.

Characteristic

Value

50 V

Power dissipation @ 25 °C

250 mW

at the base of the chip

Storage temperature

-65 °C to +150 °C

Operating temperature

-65 °C to +150 °C

ESD human body model

Class 1 B

Absolute Maximum Ratings

Performance is guaranteed only under the conditions listed in the specifications table and is

not guaranteed under the full range(s) described by the Absolute Maximum specifications.

Exceeding any of the absolute maximum/minimum specifications may result in permanent

damage to the device and will void the warranty.

CAUTION: Although this device is designed to be as robust as

possible, ESD (Electrostatic Discharge) can damage

this device. This device must be protected at all times

from ESD. Static charges may easily produce poten-

tials of several kilovolts on the human body or

equipment, which can discharge without detection.

Industry-standard ESD precautions must be employed

at all times.

Skyworks Green products are lead (Pb)-free, RoHS

(Restriction of Hazardous Substances)-compliant,

conform to the EIA/EICTA/JEITA Joint Industry Guide

(JIG) Level A guidelines, and are free from antimony

trioxide and brominated flame retardants.

NEW