Electronic Components Datasheet Search
  English  ▼

Delete All


Preview PDF Download HTML

SKY65028-70LF Datasheet(PDF) 6 Page - Skyworks Solutions Inc.

Part No. SKY65028-70LF
Description  450 MHz-2.5 GHz Linear Power Amplifier Driver
Download  8 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  SKYWORKS [Skyworks Solutions Inc.]
Homepage  http://www.skyworksinc.com
Logo SKYWORKS - Skyworks Solutions Inc.

SKY65028-70LF Datasheet(HTML) 6 Page - Skyworks Solutions Inc.

  SKY65028-70LF Datasheet HTML 1Page - Skyworks Solutions Inc. SKY65028-70LF Datasheet HTML 2Page - Skyworks Solutions Inc. SKY65028-70LF Datasheet HTML 3Page - Skyworks Solutions Inc. SKY65028-70LF Datasheet HTML 4Page - Skyworks Solutions Inc. SKY65028-70LF Datasheet HTML 5Page - Skyworks Solutions Inc. SKY65028-70LF Datasheet HTML 6Page - Skyworks Solutions Inc. SKY65028-70LF Datasheet HTML 7Page - Skyworks Solutions Inc. SKY65028-70LF Datasheet HTML 8Page - Skyworks Solutions Inc.  
Zoom Inzoom in Zoom Outzoom out
 6 / 8 page
background image
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
July 31, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200445 Rev. B
Evaluation Board Description
The Skyworks SKY65028-70LF Evaluation Board is used to test
the performance of the SKY65028-70LF power amplifier driver.
The following design considerations are general in nature and
must be followed regardless of final use or configuration.
1. Paths to ground should be made as short as possible.
2. The ground pad of the SKY65028-70LF power amplifier has
special electrical and thermal grounding requirements. This pad
is the main thermal conduit for heat dissipation. Since the circuit
board acts as the heat sink, it must shunt as much heat as pos-
sible from the amplifier. As such, design the connection to the
ground pad to dissipate the maximum wattage produced to the
circuit board. Multiple vias to the grounding layer are required.
NOTE: Junction temperature (TJ) of the device increases with a
poor connection to the slug and ground. This reduces the
lifetime of the device.
Testing Procedure
Use the following procedure to set up the SKY65028-70LF
Evaluation Board for testing:
1. Connect a 5.0 V supply to VCC. If available, enable the current
limiting function of the power supply to 240 mA.
2. Connect a signal generator to the RF signal input port. Set it to
the desired RF frequency at a power level of -15 dBm or less
to the evaluation board but do NOT enable the RF signal.
3. Connect a spectrum analyzer to the RF signal output port.
4. Enable the power supply.
5. Enable the RF signal.
6. Take measurements.
CAUTION: If any of the output signals exceed the rated maximum
values, the SKY65028-70LF evaluation board can be
permanently damaged.
C1 C2
J1 (RF In)
J2 (RF Out)
Evaluation Board Assembly
Layer 3: Ground
Layer 4: Solid Ground Plane
Layer 1: Top - Metal
Layer 2: Ground
Evaluation Board Layer Detail

Html Pages

1  2  3  4  5  6  7  8 

Datasheet Download

Go To PDF Page

Link URL

Privacy Policy
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com

Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn