IBIS4-A-6600
CYII4SM6600AB
ADVANCE
INFORMATION
Document Number: 001-02366 Rev. *D
Page 5 of 40
Specifications
General Specifications
Electro-optical specifications
Overview
Table 2. General Specifications.
Parameter
Specification
Remarks
Pixel architecture
3T-pixel
Pixel size
3.5 m x 3.5 m
The resolution and pixel size results in a 7.74 mm x 10.51 mm
optical active area.
Resolution
2210 x3002
Pixel rate
40 MHz
Using a 40- MHz system clock and 1 or 2 parallel outputs.
Shutter type
Electronic rolling shutter
Full frame rate
5 frames/second
Increases with ROI read out and/or sub sampling.
Table 3. Electro-optical Specifications
Parameter
Specification
Remarks
FPN (local)
<0.20%
RMS% of saturation signal.
PRNU (local)
<1.5%
RMS of signal level.
Conversion gain
Conversion gain
@ output (measured).
Output signal amplitude
0.6V
At nominal conditions.
Saturation charge
21.500 e-
Sensitivity (peak)
411V.m2/W.s
4.83 V/lux.s
@ 650 nm
(85 lux = 1 W/m2).
Sensitivity (visible)
328 V.m2/W.s
2.01 V/lux.s
400-700 nm
(163 lux = 1 W/m2).
Peak QE * FF
Peak Spectral Resp.
25%
0.13 A/W
Average QE*FF = 22% (visible range).
Average SR*FF = 0.1 A/W (visible range).
See spectral response curve.
Fill factor
35%
Light sensitive part of pixel (measured).
Dark current
3.37 mV/s
78 e-/s
Typical value of average dark current of the whole pixel array
(@ 21 °C).
Dark Signal Non Uniformity
8.28 mV/s
191 e-/s
Dark current RMS value (@ 21 °C).
Temporal noise
24 RMS e-
Measured at digital output (in the dark).
S/N Ratio
895:1 (59 dB)
Measured at digital output (in the dark).
Spectral sensitivity range
400 - 1000 nm
Optical cross talk
15%
4%
To the first neighboring pixel.
To the second neighboring pixel.
Power dissipation
190 mWatt
Typical (including ADCs).
[+] Feedback
[+] Feedback