FLEx18™ 3.3V 64K/128K x 36 and 128K/256K x 18
Synchronous Dual-Port RAM
CY7C0837AV
CY7C0830AV/CY7C0831AV
CY7C0832AV/CY7C0833AV
Cypress Semiconductor Corporation
•
198 Champion Court
•
San Jose
, CA 95134-1709
•
408-943-2600
Document #: 38-06059 Rev. *Q
Revised May 10, 2006
Features
• True dual-ported memory cells that allow simultaneous
access of the same memory location
• Synchronous pipelined operation
• Family of 512-Kbit, 1-Mbit, 2-Mbit, 4-Mbit and 9-Mbit
devices
• Pipelined output mode allows fast operation
• 0.18-micron CMOS for optimum speed and power
• High-speed clock to data access
• 3.3V low power
— Active as low as 225 mA (typ)
— Standby as low as 55 mA (typ)
• Mailbox function for message passing
• Global master reset
• Separate byte enables on both ports
• Commercial and industrial temperature ranges
• IEEE 1149.1-compatible JTAG boundary scan
• 144-ball FBGA (13 mm × 13 mm) (1.0 mm pitch)
• 120TQFP (14 mm x 14 mm x 1.4 mm)
• Lead(Pb)-free packages available
• Counter wrap around control
— Internal mask register controls counter wrap-around
— Counter-interrupt flags to indicate wrap-around
— Memory block retransmit operation
• Counter readback on address lines
• Mask register readback on address lines
• Dual Chip Enables on both ports for easy depth
expansion
Functional Description
The FLEx18™ family includes 512-Kbit, 1-Mbit, 2-Mbit, 4-Mbit
and 9-Mbit pipelined, synchronous, true dual-port static RAMs
that are high-speed, low-power 3.3V CMOS. Two ports are
provided, permitting independent, simultaneous access to any
location in memory. The result of writing to the same location
by more than one port at the same time is undefined. Registers
on control, address, and data lines allow for minimal set-up
and hold time.
During a Read operation, data is registered for decreased
cycle time. Each port contains a burst counter on the input
address register. After externally loading the counter with the
initial address, the counter will increment the address inter-
nally (more details to follow). The internal Write pulse width is
independent of the duration of the R/W input signal. The
internal Write pulse is self-timed to allow the shortest possible
cycle times.
A HIGH on CE0 or LOW on CE1 for one clock cycle will power
down the internal circuitry to reduce the static power
consumption. One cycle with chip enables asserted is required
to reactivate the outputs.
Additional features include: readback of burst-counter internal
address value on address lines, counter-mask registers to
control the counter wrap-around, counter interrupt (CNTINT)
flags, readback of mask register value on address lines,
retransmit functionality, interrupt flags for message passing,
JTAG for boundary scan, and asynchronous Master Reset
(MRST).
The CY7C0833AV device in this family has limited features.
Please
see
Address
Counter
and
Mask
Register
Operations[15] on page 6 for details.
Table 1. Product Selection Guide
Density
512-Kbit
(32K x 18)
1-Mbit
(64K x 18)
2-Mbit
(128K x 18)
4-Mbit
(256K x 18)
9-Mbit
(512K x 18)
Part Number
CY7C0837AV CY7C0830AV CY7C0831AV CY7C0832AV CY7C0833AV
Max. Speed (MHz)
167
167
167
167
133
Max. Access Time - clock to Data (ns)
4.0
4.0
4.0
4.0
4.7
Typical operating current (mA)
225
225
225
225
270
Package
144 FBGA
120 TQFP
144 FBGA
120 TQFP
144 FBGA
120 TQFP
144 FBGA
144 FBGA
CY7C093794V CY7C093894V CY7C09289V CY7C09369V CY7C09379V CY7C09389VFLEx18™ 3.3V 64K/128K x 36 and 128K/256K x 18
Synchronous Dual-Port RAM
[+] Feedback
[+] Feedback
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
