Electronic Components Datasheet Search |
|
LT1192CS8 Datasheet(PDF) 4 Page - Linear Technology |
|
LT1192CS8 Datasheet(HTML) 4 Page - Linear Technology |
4 / 12 page 4 LT1192 Optional Offset Nulling Circuit LT1192 • TA03 + – 5V 7 6 LT1192 3 2 –5V 4 1 8 INPUT OFFSET VOLTAGE CAN BE ADJUSTED OVER A ±20mV RANGE WITH A 1k TO 10k POTENTIOMETER ΩΩ The q denotes the specifications which apply over the full operating temperature range of 0 °C ≤ TA ≤ 70°C. VS = ±5V, Pin 5 open circuit unless otherwise noted. LT1191C SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS VOS Input Offset Voltage N8 Package q 0.4 3 mV SO-8 Package 4 mV ∆VOS/∆T Input VOS Drift q 2 µV/°C IOS Input Offset Current q 0.2 1.7 µA IB Input Bias Current q ±0.5 ±2.5 µA CMRR Common Mode Rejection Ratio VCM = – 2.5V to 3.5V q 68 85 dB PSRR Power Supply Rejection Ratio VS = ±2.375V to ±5V q 70 90 dB AVOL Large-Signal Voltage Gain RL = 1k, VO = ±3V q 90 140 V/mV RL = 100Ω, VO = ±3V q 10 30 V/mV VOUT Output Voltage Swing RL = 1k q ±3.7 ±3.9 V IS Supply Current q 32 38 mA Shutdown Supply Current Pin 5 at V – (Note 8) q 1.4 2.1 mA ISHDN Shutdown Pin Current Pin 5 at V – q 20 µA Note 1: Absolute Maximum Ratings are those values beyond which the life of the device may be impaired. Note 2: A heat sink is required to keep the junction temperature below absolute maximum when the output is shorted. Note 3: Exceeding the input common mode range may cause the output to invert. Note 4: Slew rate is measured between ±1V on the output, with a ±0.3V input step. Note 5: Full-power bandwidth is calculated from the slew rate measurement: FPBW = SR/2 πVP. Note 6: Settling time measurement techniques are shown in “Take the Guesswork Out of Settling Time Measurements,” EDN, September 19, 1985. AV = –5, RL = 1k. Note 7: NTSC (3.58MHz). For RL = 1k, Diff AV = 0.1%, Diff Ph = 0.01°. Diff AV and Diff Ph can be reduced for AV < 10. Note 8: See Applications section for shutdown at elevated temperatures. Do not operate the shutdown above TJ > 125°C. Note 9: AC parameters are 100% tested on the ceramic and plastic DIP packaged parts (J and N suffix) and are sample tested on every lot of the SO packaged parts (S suffix). ELECTRICAL CHARACTERISTICS |
Similar Part No. - LT1192CS8 |
|
Similar Description - LT1192CS8 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |