Electronic Components Datasheet Search |
|
SST32HF202-70-4C-L3K Datasheet(PDF) 1 Page - Silicon Storage Technology, Inc |
|
SST32HF202-70-4C-L3K Datasheet(HTML) 1 Page - Silicon Storage Technology, Inc |
1 / 30 page ©2005 Silicon Storage Technology, Inc. S71209-06-000 5/05 1 The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc. MPF and ComboMemory are trademarks of Silicon Storage Technology, Inc. These specifications are subject to change without notice. Data Sheet FEATURES: • MPF + SRAM ComboMemory – SST32HF202: 128K x16 Flash + 128K x16 SRAM – SST32HF402: 256K x16 Flash + 128K x16 SRAM – SST32HF802: 512K x16 Flash + 128K x16 SRAM • Single 2.7-3.3V Read and Write Operations • Concurrent Operation – Read from or write to SRAM while Erase/Program Flash • Superior Reliability – Endurance: 100,000 Cycles (typical) – Greater than 100 years Data Retention • Low Power Consumption: – Active Current: 15 mA (typical) for Flash or SRAM Read – Standby Current: 20 µA (typical) • Flexible Erase Capability – Uniform 2 KWord sectors – Uniform 32 KWord size blocks • Fast Read Access Times: – Flash: 70 ns –SRAM: 70 ns • Latched Address and Data for Flash • Flash Fast Erase and Word-Program: – Sector-Erase Time: 18 ms (typical) – Block-Erase Time: 18 ms (typical) – Chip-Erase Time: 70 ms (typical) – Word-Program Time: 14 µs (typical) – Chip Rewrite Time: SST32HF202: 2 seconds (typical) SST32HF402: 4 seconds (typical) SST32HF802: 8 seconds (typical) • Flash Automatic Erase and Program Timing – Internal VPP Generation • Flash End-of-Write Detection – Toggle Bit – Data# Polling • CMOS I/O Compatibility • JEDEC Standard Command Set • Conforms to Flash pinout • Packages Available – 48-ball LFBGA (6mm x 8mm) – 48-ball LBGA (10mm x 12mm) (SST32HF802 only) • All non-Pb (lead-free) devices are RoHS compliant PRODUCT DESCRIPTION The SST32HF202/402/802 ComboMemory devices inte- grate a 128K x16, 256K x16, 512K x16 CMOS flash mem- ory bank with a 128K x16 CMOS SRAM memory bank in a Multi-Chip Package (MCP), manufactured with SST’s pro- prietary, high performance SuperFlash technology. Featuring high performance Word-Program, the flash memory bank provides a maximum Word-Program time of 14 µsec. The entire flash memory bank can be erased and programmed word-by-word in typically 2 seconds for the SST32HF202, 4 seconds for the SST32HF402, and 8 sec- onds for the SST32HF802, when using interface features such as Toggle Bit or Data# Polling to indicate the comple- tion of Program operation. To protect against inadvertent flash write, the SST32HF202/402/802 devices contain on- chip hardware and software data protection schemes. The SST32HF202/402/802 devices offer a guaranteed endur- ance of 10,000 cycles. Data retention is rated at greater than 100 years. The SST32HF202/402/802 devices consist of two inde- pendent memory banks with respective bank enable sig- nals. The Flash and SRAM memory banks are superimposed in the same memory address space. Both memory banks share common address lines, data lines, WE# and OE#. The memory bank selection is done by memory bank enable signals. The SRAM bank enable sig- nal, BES# selects the SRAM bank. The flash memory bank enable signal, BEF# selects the flash memory bank. The WE# signal has to be used with Software Data Protec- tion (SDP) command sequence when controlling the Erase and Program operations in the flash memory bank. The SDP command sequence protects the data stored in the flash memory bank from accidental alteration. The SST32HF202/402/802 provide the added functionality of being able to simultaneously read from or write to the SRAM bank while erasing or programming in the flash memory bank. The SRAM memory bank can be read or written while the flash memory bank performs Sector- Erase, Bank-Erase, or Word-Program concurrently. All flash memory Erase and Program operations will automati- cally latch the input address and data signals and complete the operation in background without further input stimulus requirement. Once the internally controlled Erase or Pro- gram cycle in the flash bank has commenced, the SRAM bank can be accessed for Read or Write. Multi-Purpose Flash (MPF) + SRAM ComboMemory SST32HF202 / SST32HF402 / SST32HF802 SST32HF202 / 402 / 8022Mb Flash + 2Mb SRAM, 4Mb Flash + 2Mb SRAM, 8Mb Flash + 2Mb SRAM (x16) MCP ComboMemory |
Similar Part No. - SST32HF202-70-4C-L3K |
|
Similar Description - SST32HF202-70-4C-L3K |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |