3 / 12 page
4-559
RF3315
Rev A10 050318
Pin
Function
Description
Interface Schematic
1RF IN
RF input pin. This pin is not internally DC-blocked. A DC blocking
capacitor, suitable for the frequency of operation, should be used in
most applications.
2GND
Ground connection.
3RF OUT
RF output and bias pin. For biasing, an RF choke is needed. Because
DC is present on this pin, a DC blocking capacitor, suitable for the fre-
quency of operation, should be used in most applications. See applica-
tion schematic for configuration and value.
4GND
Ground connection.
Pkg
Base
GND
Ground connection.
VCC
RF IN
VCC
RF OUT