Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

EMC2300 Datasheet(PDF) 17 Page - SMSC Corporation

Part No. EMC2300
Description  Fan Control Device with High Frequency PWM and Temperature Monitors
Download  81 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  SMSC [SMSC Corporation]
Homepage  http://www.smsc.com
Logo 

EMC2300 Datasheet(HTML) 17 Page - SMSC Corporation

Zoom Inzoom in Zoom Outzoom out
 17 / 81 page
background image
Fan Control Device with High Frequency PWM and Temperature Monitors
Datasheet
SMSC EMC2300
17
Revision 0.2 (06-14-06)
DATASHEET
Read Byte
The Read Byte protocol is used to read data from the registers. The data will only be read if the
protocol shown in Table 5.3 is performed correctly. Only one byte is transferred at time for a Read Byte
protocol.
5.4
Invalid Protocol Response Behavior
Registers that are accessed with an invalid protocol will not be updated. A register will only be updated
following a valid protocol. The only valid protocols are the Write Byte and Read Byte protocols, which
are described above.
The EMC2300 device responds to three SMBus slave addresses:
1. The SMBus slave address that supports the valid protocols defined in the previous sections is
determined by the level on the Address Select and Address Enable pins as shown in Section 5.1,
"Slave Address," on page 15.
2. SMBus Alert Response (0001 100). The SMBus will only respond to the SMBus Alert Response
Address if the SMBus Alert Response interrupt was generated to request a response from the Host.
The SMBus Alert Response is defined in Section 5.10, "SMBus Alert Response Address," on
page 18.
Attempting to communicate with the Hardware Monitor Block over SMBus with an invalid slave
address, or invalid protocol will result in no response, and the SMBus Slave Interface will return to the
idle state.
The only valid registers that are accessible by the SMBus slave address are the registers defined in
the Registers Section. See Section 5.4.1, "Undefined Registers" for response to undefined registers.
5.4.1
Undefined Registers
Reads to undefined registers return 00h. Writes to undefined registers have no effect and return no
error.
5.5
General Call Address Response
The EMC2300 will not respond to a general call address of 0000_000.
5.6
Slave Device Time-Out
The EMC2300 supports the slave device timeout as per the SMBus Specification, v2.0.
Table 5.2 SMBus Write Byte Protocol
FIELD
START
SLAVE ADDR
WR
ACK
REG. ADDR
ACK
REG. DATA
ACK
STOP
Bits
17
1
1
8
1
8
1
1
Table 5.3 SMBus Read Byte Protocol
FIELD:
START
SLAVE
ADDR
WR
ACK
REG.
ADDR
ACK
START
SLAVE
ADDR
RD
ACK
REG.
DATA
NACK
STOP
Bits:
17
1
1
8
1
1
7
1
1
8
1
1


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  57  58  59  60  61  62  63  64  65  66  67  68  69  70  71  72  73  74  75  76  77  78  79  80  81 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn