Electronic Components Datasheet Search |
|
SN75112NE4 Datasheet(PDF) 2 Page - Texas Instruments |
|
SN75112NE4 Datasheet(HTML) 2 Page - Texas Instruments |
2 / 18 page SN55110A, SN75110A, SN75112 DUAL LINE DRIVERS SLLS106G − DECEMBER 1975 − REVISED NOVEMBER 2004 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 description/ordering information (continued) These drivers feature independent channels with common voltage supply and ground terminals. The significant difference between the three drivers is in the output-current specification. The driver circuits feature a constant output current that is switched to either of two output terminals by the appropriate logic levels at the input terminals. The output current can be switched off (inhibited) by low logic levels on the enable inputs. The output current nominally is 12 mA for the ’110A devices and is 27 mA for the SN75112. The enable/inhibit feature is provided so the circuits can be used in party-line or data-bus applications. A strobe or inhibitor (enable D), common to both drivers, is included for increased driver-logic versatility. The output current in the inhibited mode, IO(off), is specified so that minimum line loading is induced when the driver is used in a party-line system with other drivers. The output impedance of the driver in the inhibited mode is very high. The output impedance of a transistor is biased to cutoff. The driver outputs have a common-mode voltage range of −3 V to 10 V, allowing common-mode voltage on the line without affecting driver performance. All inputs are diode clamped and are designed to satisfy TTL-system requirements. The inputs are tested at 2 V for high-logic-level input conditions and 0.8 V for low-logic-level input conditions. These tests ensure 400-mV noise margin when interfaced with TTL Series 54/74 devices. The SN55110A is characterized for operation over the full military temperature range of −55 °C to 125°C. The SN75110A and SN75112 are characterized for operation from 0 °C to 70°C. FUNCTION TABLE (each driver) LOGIC INPUTS ENABLE INPUTS OUTPUTS† A B C D Y Z X X L X Off Off X XX LOff Off L XH HOn Off X LH HOn Off H H H H Off On H = high level, L = low level, X = irrelevant † When using only one channel of the line drivers, the other channel should be inhibited and/or have its outputs grounded. |
Similar Part No. - SN75112NE4 |
|
Similar Description - SN75112NE4 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |