BAS20HT1

http://onsemi.com

3

PACKAGE DIMENSIONS

SOD−323

CASE 477−02

ISSUE G

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: MILLIMETERS.

3. LEAD THICKNESS SPECIFIED PER L/F DRAWING

WITH SOLDER PLATING.

4. DIMENSIONS A AND B DO NOT INCLUDE MOLD

FLASH, PROTRUSIONS OR GATE BURRS.

5. DIMENSION L IS MEASURED FROM END OF

RADIUS.

NOTE 3

D

1

2

b

E

A3

A1

A

C

STYLE 1:

PIN 1. CATHODE

2. ANODE

NOTE 5

L

1.60

0.063

0.63

0.025

0.83

0.033

2.85

0.112

DIM

MIN

NOM

MAX

MILLIMETERS

A

0.80

0.90

1.00

A1

0.00

0.05

0.10

A3

0.15 REF

b

0.25

0.32

0.4

C

0.089

0.12

0.177

D

1.60

1.70

1.80

E

1.15

1.25

1.35

0.08

2.30

2.50

2.70

L

0.031

0.035

0.040

0.000

0.002

0.004

0.006 REF

0.010

0.012

0.016

0.003

0.005

0.007

0.062

0.066

0.070

0.045

0.049

0.053

0.003

0.090

0.098

0.105

MIN

NOM

MAX

INCHES

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and

Mounting Techniques Reference Manual, SOLDERRM/D.

SOLDERING FOOTPRINT*

ON Semiconductor and

are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Japan: ON Semiconductor, Japan Customer Focus Center

2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051

Phone: 81−3−5773−3850

BAS20HT1/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 61312, Phoenix, Arizona 85082−1312 USA

Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada

Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: http://onsemi.com

Order Literature: http://www.onsemi.com/litorder

For additional information, please contact your

local Sales Representative.