Electronic Components Datasheet Search |
|
SST55LD019B-45-I-TQWE Datasheet(PDF) 1 Page - Silicon Storage Technology, Inc |
|
SST55LD019B-45-I-TQWE Datasheet(HTML) 1 Page - Silicon Storage Technology, Inc |
1 / 79 page ©2006 Silicon Storage Technology, Inc. S71241-04-000 12/06 1 The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc. Some content is reproduced from the CompactFlash Specification (2.0) by permission of the CompactFlash Association. Other content is reproduced from the ATA/ATAPI-6 (T13/1410D revision 3b) spec- ification by permission of the National Committee for Information Technology Standards. These specifications are subject to change without notice. Data Sheet FEATURES: • Industry Standard ATA/IDE Bus Interface – Host Interface: 8- or 16-bit access – Supports up to PIO Mode-4 – Supports up to Multi-word DMA Mode-2 • Interface for standard NAND Flash Media – Flash Media Interface: 8-bit or 16-bit access - Supports up to 8 flash media devices directly - Supports up to 64 flash media devices with external decoding logic – Supports Single-Level Cell (SLC) flash media - 512 Byte and 2 KByte program page size • Low power, 3.3V core operation • 5.0V or 3.3V host interface through VDDQ pins • Low current operation: – Active mode: 25 mA/35 mA (3.3V/5.0V) (typical) – Sleep mode: 40 µA/50 µA (3.3V/5.0V) (typical) • Power Management Unit – Immediate disabling of unused circuitry • Expanded Data Protection – WP_PD# pin configurable by firmware for prevention of data overwrites – Added data security through user-selectable protection zones • 20-byte Unique ID for Enhanced Security – Factory Pre-programmed 10-byte Unique ID – User-Programmable 10-byte ID • Integrated Voltage Detector – Industrial Controller requires external POR# signal • Pre-programmed Embedded Firmware – Performs self-initialization on first system Power-on – Executes industry standard ATA/IDE commands – Implements dynamic wear-leveling algorithms to substantially increase the longevity of flash media – Embedded Flash File System – Built-in ECC corrects up to 3 random 12-bit symbols of error per 512-byte sector • Internal or External System Clock Option • Multi-tasking Technology enables Fast Sustained Write Performance (Host to Flash) – SST55LD019A supports up to 6 MB/sec – SST55LD019B/C support up to 10MB/sec • Fast Sustained Read Performance (Flash to Host) – Up to 10 MB/sec • Automatic Recognition and Initialization of Flash Media Devices – Seamless integration into a standard SMT manufacturing process – 5 sec. (typical) for flash drive recognition and setup • Commercial and Industrial Temperature Ranges – 0°C to 70°C for commercial operation – -40°C to +85°C for industrial operation • Packages Available – 100-lead TQFP – 16mm x 16mm – 84-ball TFBGA – 9mm x 9mm – 85-ball VFBGA – 6mm x 6mm • All non-Pb (lead-free) devices are RoHS compliant PRODUCT DESCRIPTION SST’s ATA Flash Disk Controller is the heart of a high-per- formance, flash media-based data storage system. The ATA Flash Disk Controller recognizes the control, address, and data signals on the ATA/IDE bus and translates them into memory accesses to the standard NAND-type flash media. The SST55LD019A/B/C device supports Single Level Cell (SLC) flash media. This technology suits solid state mass storage applications offering new, expanded functionality while enabling smaller, lighter designs with lower power consumption. The ATA/IDE interface is widely used in such products as portable and desktop computers, digital cameras, music players, handheld data collection scanners, PDAs, handy terminals, personal communicators, audio recorders, moni- toring devices, and set-top boxes. SST’s ATA Flash Disk Controller supports standard ATA/IDE protocol with up to PIO Mode-4 and Multi-word DMA Mode-2 interface. Utilizing SST’s proprietary SuperFlash memory technol- ogy, the ATA Flash Disk Controller is factory pre-pro- grammed with an embedded flash file system which, upon initial Power-on, recognizes the attached flash media devices, sets up a bad block table, executes all necessary handshaking routines for flash media support, and, finally, performs the low-level format. This process typically takes about 3 sec + 0.5 sec/GByte of drive capacity, allowing a 2 GByte flash drive to be fully initialized in about 4 sec- onds. This technology enables a very fast, completely seamless integration of flash drives into an embedded design. For added manufacturing flexibility, system debug, re-initializa- tion, and user customization can be accomplished either through the ATA/IDE interface, for ATA Disk Module or flash drive products, or through the Serial Communication Interface (SCI), for fully embedded ATA Flash Disk Con- ATA Flash Disk Controller SST55LD019A / SST55LD019B / SST55LD019C SST55LD019A/B/CHigh-Performance ATA Flash Disk Controller |
Similar Part No. - SST55LD019B-45-I-TQWE |
|
Similar Description - SST55LD019B-45-I-TQWE |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |