4 / 8 page
D11E Series Sensors – Visible Green, Blue or White LED Light Source
page
4
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Output Pulse Stretcher Programming
Output Pulse Stretcher
A 40 millisecond pulse stretcher (OFF-delay) may be enabled for applications where a
very short sensing event might be missed due to the response of the load or input
connected to the sensor output. The pulse stretcher is turned ON or OFF using the
following procedure:
Push Button
Resulting Indicator Status
Push and hold for
≥ 2 seconds
Green: Flashes at 1Hz
Yellow: OFF
Red:
Pulses to indicate relative received signal
strength
Pulse Stretcher
Double-click to display status
Single-click to toggle pulse stretcher
ON or OFF
pulse stretcher ON:
Green: OFF
Yellow: OFF
Red:
ON steadily
Double-click to save
configuration and return to
RUN mode
See page 2
pulse stretcher OFF:
Green: OFF
Yellow: OFF
Red:
Double-Flash
Push and Hold
≥ 2 Seconds
Double-Click
Single-Click
Double-Click