![]() |
Electronic Components Datasheet Search |
|
NCP400 Datasheet(PDF) 3 Page - ON Semiconductor |
|
NCP400 Datasheet(HTML) 3 Page - ON Semiconductor |
3 / 14 page ![]() NCP400 http://onsemi.com 3 ABSOLUTE MAXIMUM RATINGS Rating Symbol Value Unit Input Voltage VIN 0 to 5.5 V Enable Voltage ENABLE −0.3 to VIN+0.3 V Output Voltage VOUT −0.3 to VIN+0.3 V Delay Capacitor Pin Voltage VCD −0.3 to VIN+0.3 V Reset Pin Voltage Vreset −0.3 to VIN+0.3 V Reset Pin Current Ireset 70 mA Power Dissipation and Thermal Characteristics for Microbump−6 Thermal Resistance Junction−to−Air (Note 3) RθJA Refer to Figure 22 °C/W Operating Junction Temperature TJ −40 to +125 °C Operating Ambient Temperature TA −40 to +85 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. This device contains ESD protection and exceeds the following tests: Human Body Model (HBM) ±2000 V per MIL−STD−883, Method 3015 Machine Model (MM) ±200 V. 2. Latchup capability (85 °C)100 mA DC with trigger voltage. 3. PCB top layer uses a single copper layer and is tested @ 250 mW. |