![]() |
Electronic Components Datasheet Search |
|
ADP3118 Datasheet(PDF) 4 Page - Analog Devices |
|
ADP3118 Datasheet(HTML) 4 Page - Analog Devices |
4 / 16 page ![]() ADP3118 Rev. 0 | Page 4 of 16 ABSOLUTE MAXIMUM RATINGS Table 2. Parameter Rating VCC −0.3 V to +15 V BST −0.3 V to VCC +15 V BST to SW −0.3 V to +15 V SW DC −5 V to +15 V <200 ns −10 V to +25 V DRVH DC SW − 0.3 V to BST + 0.3 V <200 ns SW − 2 V to BST + 0.3 V DRVL DC −0.3 V to VCC + 0.3 V <200 ns −2 V to VCC + 0.3 V IN, OD −0.3 V to 6.5 V θJA, SOIC 2-Layer Board 123°C/W 4-Layer Board 90°C/W Operating Ambient Temperature Range 0°C to 85°C Junction Temperature Range 0°C to 150°C Storage Temperature Range −65°C to +150°C Lead Temperature Range Soldering (10 sec) 300°C Vapor Phase (60 sec) 215°C Infrared (15 sec) 260°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Unless otherwise specified, all voltages are referenced to PGND. ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degrada- tion or loss of functionality. |