![]() |
Electronic Components Datasheet Search |
|
ADP1822 Datasheet(PDF) 5 Page - Analog Devices |
|
ADP1822 Datasheet(HTML) 5 Page - Analog Devices |
5 / 24 page ![]() ADP1822 Rev. B | Page 5 of 24 ABSOLUTE MAXIMUM RATINGS Table 2. Parameter Rating Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. VCC, SHDN −0.3 V to +6 V , SYNC, FREQ, COMP, SS, FB, TRKP, TRKN, MAR, MSEL, MUP, and MDN to GND; PVCC to PGND; BST to SW BST to GND −0.3 V to +30 V CSL to GND −1 V to +30 V DH to GND (VSW − 0.3 V) to (VBST + 0.3 V) Absolute maximum ratings apply individually only, not in combination. Unless otherwise specified, all other voltages are referenced to GND. DL to PGND −0.3 V to (VPVCC + 0.3 V) SW to GND −2 V to +30 V PGND to GND ±2 V θJA, 2-Layer (SEMI Standard Board) 122°C/W θJA, 4-Layer (JEDEC Standard Board) 82°C/W Operating Ambient Temperature Range −40°C to +85°C Operating Junction Temperature Range −55°C to +125°C Storage Temperature Range −65°C to +150°C Maximum Soldering Lead Temperature 260°C ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. |