Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

MAX11014 Datasheet(PDF) 1 Page - Maxim Integrated Products

Part No. MAX11014
Description  Automatic RF MESFET Amplifier Drain-Current Controllers
Download  69 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  MAXIM [Maxim Integrated Products]
Homepage  http://www.maxim-ic.com
Logo 

MAX11014 Datasheet(HTML) 1 Page - Maxim Integrated Products

 
Zoom Inzoom in Zoom Outzoom out
 1 / 69 page
background image
General Description
The MAX11014/MAX11015 set and control bias condi-
tions for dual MESFET power devices found in point-to-
point communication and other microwave base
stations. The MAX11014 integrates complete dual ana-
log closed-loop drain-current controllers for Class A
MESFET amplifier operation, while the MAX11015 tar-
gets Class AB operation. Both devices integrate SRAM
lookup tables (LUTs) that can be used to store temper-
ature and drain-current compensation data.
Each device includes dual high-side current-sense
amplifiers to monitor the MESFET drain currents through
the voltage drop across the sense resistors in the 0 to
625mV range. External diode-connected transistors mon-
itor the MESFET temperatures while an internal tempera-
ture sensor measures the local die temperature of the
MAX11014/MAX11015. The internal DAC sets the volt-
ages across the current-sense resistors by controlling
the GATE voltages. The internal 12-bit SAR ADC digitizes
internal and external temperature, internal DAC voltages,
current-sense amplifier voltages, and external GATE volt-
ages. Two of the 11 ADC channels are available as gen-
eral-purpose analog inputs for analog system monitoring.
The MAX11014’s gate-drive amplifier functions as an
integrator for the Class A drain-current control loop
while the MAX11015’s gate-drive amplifier functions
with a gain of -2 for Class AB applications. The current-
limited gate-drive amplifier can be fast clamped to an
external voltage independent of the digital input from
the serial interface. Both the MAX11014 and the
MAX11015 include self-calibration modes to minimize
error over time, temperature, and supply voltage.
The MAX11014/MAX11015 feature an internal reference
and can operate from separate ADC and DAC external
references. The internal reference provides a well-regu-
lated, low-noise +2.5V reference for the ADC, DAC, and
temperature sensors. These integrated circuits operate
from a 4-wire 20MHz SPI™-/MICROWIRE™-compatible
or 3.4MHz I2C*-compatible serial interface (pin-selec-
table). Both devices operate from a +4.75V to +5.25V
analog supply (2.8mA typical supply current), a +2.7V
to +5.25V digital supply (1.5mA typical supply current),
and a -4.5V to -5.5V negative supply (1.1mA supply
current). The MAX11014/MAX11015 are available in a
48-pin thin QFN package specified over the -40°C to
+105°C temperature range.
*Purchase of I2C components from Maxim Integrated Products,
Inc. or one of its sublicensed Associated Companies, conveys
a license under the Phillips I2C Patent Rights to use these com-
ponents in an I2C system, provided that the system conforms to
the I2C Standard Specification as defined by Phillips.
Features
♦ Dual Drain-Current-Sense Gain Amplifier
Preset Gain of 4
±0.5% Accuracy for Sense Voltages Between
75mV and 625mV (MAX11014)
♦ Common-Mode Sense-Resistor Voltage Range
0.5V to 11V (MAX11014)
5V to 32V (MAX11015)
♦ Low-Noise Output GATE Bias with ±10mA GATE
Drive
♦ Fast Clamp and Power-On Reset
♦ 12-Bit DAC Controls MESFET GATE Voltage
♦ Internal Temperature Sensor/Dual Remote Diode
Temperature Sensors
♦ Internal 12-Bit ADC Measures Temperature and
Voltage
♦ Pin-Selectable Serial Interface
3.4MHz I2C-Compatible Interface
20MHz SPI-/MICROWIRE-Compatible Interface
Automatic RF MESFET Amplifier
Drain-Current Controllers
________________________________________________________________ Maxim Integrated Products
1
PART
PIN-PACKAGE
PKG
CODE
AMPLIFIER
MAX11014BGTM+ 48 Thin QFN-EP** T4877-6
Class A
MAX11015BGTM+* 48 Thin QFN-EP** T4877-6
Class AB
Ordering Information
Applications
19-3985; Rev 0; 2/06
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
SPI is a trademark of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
+ Denotes a lead-free package.
*Future product—contact factory for availability.
**EP = Exposed pad.
Note: All devices are specified over the -40°C to +105°C operating
temperature range.
Pin Configuration and Typical Operating Circuit appear at end
of data sheet.
Cellular Base-Station RF MESFET Bias Controllers
Point-to-Point or Point-to-Multipoint Links
Industrial Process Control


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  57  58  59  60  61  62  63  64  65  66  67  68  69 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn