Electronic Components Datasheet Search |
|
SMD1206 Datasheet(PDF) 1 Page - Littelfuse |
|
SMD1206 Datasheet(HTML) 1 Page - Littelfuse |
1 / 2 page 040617 WebSite Europe Tel: +49 2302 662-107 Americas Tel: +1 404 699-7820 Asia Tel: +852 26 14-1108 China Tel: +86 21 6432-5146 www.wickmanngroup.com E-mail: sales@wickmann.com E-mail: service@wickmannusa.com E-mail: sales@wickmann.com.hk E-mail: sales@wickmann.cn 1.80 1.0 1.0 1.8 Dimensions (mm) Solder pad Layout (mm) POLYFUSE® RESETTABLE FUSES Specifications Packaging A Blistertape and reel Ø 178 mm Materials Terminals: Solder-plated copper TS: Solder Material: 63/37 SnPb TF: Lead free plating on request Max. Device Surface Temperature in Tripped State 125 °C Operating / Storage Temperature -40 ºC to +85 ºC (consider derating) Humidity Ageing +85 °C, 85% R.H., 1000 hours, ± 5 % typical resistance change Vibration MIL-STD-883C, Method 2007.1, Condition A, no change Thermal Shock MIL-STD-202F, Method 107G +85 °C to -40 °C 20 times, -30 % typical resistance change Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002, Category 3 Reflow only Solvent Resistance MIL-STD-202, Method 215, no change Marking “P”, Part Code SMD Type, 6 V - 30 V Standard UL 1434 1st Edition CSA C22.2 No. 0 CSA TIL No. CA-3A Approvals cULus Recognition TÜV Features This product line enables installation in limited space applications. These devices offer wide range in hold currents from 0.125 A to 1.50 A and voltages from 6 V to 30 V . The SMD1206 product line is suitable for high density circuit board applications in computers, cellular phone and general electronics. Suitable for reflow soldering WebLinks Further info see: www.wickmanngroup.com Further application info see fuseology: www.wickmanngroup.com/download/fuseology.pdf SMD1206 formerly No. 727 Dimensions (mm) Model A B C D E packaging quantity Min Max Min Max Min Max Min Min Max tape SMD1206P012TS/TF 3.00 3.50 1.50 1.80 0.65 1.45 0.10 0.20 0.45 3.000 SMD1206P016TS/TF 3.00 3.50 1.50 1.80 0.65 1.45 0.10 0.20 0.45 3.000 SMD1206P020TS/TF 3.00 3.50 1.50 1.80 0.50 1.00 0.10 0.20 0.45 4.000 SMD1206P025TS/TF 3.00 3.50 1.50 1.80 0.50 1.00 0.10 0.20 0.45 4.000 SMD1206P035TS/TF 3.00 3.50 1.50 1.80 0.45 0.75 0.10 0.20 0.45 4.000 SMD1206P035TS/TF/15 3.00 3.50 1.50 1.80 0.45 0.75 0.10 0.20 0.45 4.000 SMD1206P050TS/TF 3.00 3.50 1.50 1.80 0.45 0.75 0.10 0.20 0.45 4.000 SMD1206P075TS/TF 3.00 3.50 1.50 1.80 0.45 1.25 0.10 0.20 0.45 3.000 SMD1206P100TS/TF 3.00 3.50 1.50 1.80 0.75 1.25 0.10 0.20 0.45 3.000 SMD1206P150TS/TF 3.00 3.50 1.50 1.80 1.00 1.60 0.10 0.20 0.45 2.000 SMD1206P012TS/TF 0.125 0.29 30 40 0.20 @ 1.00 0.6 1.500 3.600 6.000 • • SMD1206P016TS/TF 0.160 0.37 30 40 0.30 @ 1.00 0.6 1.200 2.800 4.500 • • SMD1206P020TS/TF 0.200 0.40 16 40 0.05 @ 8.00 0.6 0.600 1.550 2.500 • • SMD1206P025TS/TF 0.250 0.50 16 40 0.08 @ 8.00 0.6 0.550 1.400 2.300 • • SMD1206P035TSTF 0.350 0.75 6 40 0.10 @ 8.00 0.6 0.300 0.750 1.200 • • SMD1206P035TS/TF/15 0.350 0.75 15 40 0.10 @ 8.00 0.6 0.300 0.750 1.200 • • SMD1206P050TS/TF 0.500 1.00 6 40 0.10 @ 8.00 0.6 0.150 0.400 0.700 • • SMD1206P075TS/TF 0.750 1.50 6 40 0.20 @ 8.00 0.6 0.090 0.200 0.290 • • SMD1206P100TS/TF 1.000 1.80 6 40 0.30 @ 8.00 0.6 0.055 0.110 0.210 • • SMD1206P150TS/TF 1.500 3.00 6 40 1.00 @ 8.00 0.8 0.040 0.080 0.120 • • Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF). NOTE: I hold = Hold current: maximum current device will pass without tripping in 20 °C still air. I trip = Trip current: minimum current at which the device will trip in 20 °C still air. V max = Maximum voltage device can withstand without damage at rated current (I max) I max = Maximum fault current device can withstand without damage at rated voltage (V max) P d = Power dissipated from device when in the tripped state at 20 °C still air. R min= Minimum resistance of device in initial (un-soldered) state. R 1max= Maximum resistance of device at 20 °C measured one hour after tripping for 20 s. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. Specifications are subject to change without notice Model I hold I Trip V max. dc I max. max. time to trip P d max. Resistance Approvals (A) (A) (V) (A) (s @ A) (W) R min.(Ω) R typ. (Ω) RI max.(Ω) Order Qty. Order- Model Packaging Information Number Please choose TS for SnPb and TF for Sn plating |
Similar Part No. - SMD1206 |
|
Similar Description - SMD1206 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |