Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

ADM1172 Datasheet(PDF) 5 Page - Analog Devices

Part No. ADM1172
Description  2.7 V to 16.5 V Hot Swap Controller with Power-Fail Comparator
Download  16 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  AD [Analog Devices]
Homepage  http://www.analog.com
Logo 

ADM1172 Datasheet(HTML) 5 Page - Analog Devices

 
Zoom Inzoom in Zoom Outzoom out
 5 / 16 page
background image
ADM1172
Rev. 0 | Page 5 of 16
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
TIMER 1
GND
2
PFO
3
ON
4
VCC
8
SENSE
7
PFI
6
GATE
5
ADM1172-1AUJ
TOP VIEW
(Not to Scale)
ON-CLR
TIMER 1
GND
2
PFO 3
4
VCC
8
SENSE
7
PFI
6
GATE
5
ADM1172-2AUJ
TOP VIEW
(Not to Scale)
Figure 2. Pin Configuration, 1AUJ Model
Figure 3. Pin Configuration, 2AUJ Model
Table 4. Pin Function Descriptions
Pin No.
Mnemonic
Description
1
TIMER
Timer Input Pin. The initial and circuit breaker timing cycles are set by this external capacitor. The initial timing
delay is 272.9 ms/μF, and 21.7 ms/μF for a circuit breaker delay. When the TIMER pin is pulled beyond the upper
threshold, the GATE turns off.
2
GND
Chip Ground Pin.
3
PFO
Power-Fail Comparator Output. Digital output from the power-fail comparator.
4
ON (ON-CLR)
Input Pin. The ON (ON-CLR) pin is an input to a comparator that has a low-to-high threshold of 1.3 V with 80 mV
hysteresis and a glitch filter. The ADM1172 is reset when the ON (ON-CLR) pin is low. When the ON (ON-Error!)
pin is high, the ADM1172 is enabled. A rising edge on this pin has the added function of clearing a fault and
restarting the device on the latched off model, the ADM1172-2.
5
GATE
Gate Output Pin. An internal charge pump provides a 12 μA pull-up current to drive the gate of an N-channel
MOSFET. In an overcurrent condition, the ADM1172 controls the external FET to maintain a constant load
current.
6
PFI
Power-Fail Comparator Input. Comparator threshold = 0.6 V.
7
SENSE
Current Limit Sense Input Pin. The current limit is set via a sense resistor between the VCC and SENSE pins. In an
overcurrent condition, the gate of the FET is controlled to maintain the SENSE voltage at 50 mV. When this limit is
reached, the TIMER circuit breaker mode is activated. The circuit breaker limit can be disabled by connecting the
VCC pin and SENSE pin together.
8
VCC
Positive Supply Input Pin. The ADM1172 operates between 2.7 V to 16.5 V. An undervoltage lockout (UVLO)
circuit with a glitch filter resets the ADM1172 when the supply voltage drops below the specified UVLO limit.


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn