Electronic Components Datasheet Search |
|
CHM-F-B19-P1-0-2 Datasheet(PDF) 3 Page - ITT Industries |
|
CHM-F-B19-P1-0-2 Datasheet(HTML) 3 Page - ITT Industries |
3 / 36 page CHM 2.0 Connector System acc to IEC 61076-4-101 3 Definition of Terms Connector according to IEC 61076-4-101 The hardmetric connector system CHM 2.0 was developed according to the international standard IEC 61076-4-101. As a result, a worldwide standard for the combination of PCBs is safeguarded by multicontact plug-and-socket connectors for customers. PCBs can be exchanged without problems from system to system. Important parameters like fixing, shielding and coding remain compatible to all applications. The spacing The CHM 2.0 connectors have been developed with a spacing of 2 mm between contacts. These connectors are modular and therefore can be stacked together without interrupting the continuity of the 2 mm design. No space is wasted within a row of connectors. Module stacking To improve stacking and to avoid accidental reversal of connectors the end of the housings engage the adjacent connector to insure exact positioning onto the PCB board and give the modules the necessary support. Coding In order to avoid accidental plug-in among PC boards the IEC 61076-4- 101 standard provides protection through coding. Coding keys are easily hand inserted into the multifunction block of the connector module A, L and M. The pins are colour coded for fast visual recognition. Multifunction block The modules A, L, M and compact PCI are equipped with a multifunction block. The coding devices, according to the IEC standard, can be added to the multifunction block. The guides guaranty the correct mating and prohibit accidental reversal of the male and female connectors. The coding devices may be assembled by a single plug and pulling tool and/or again removed. Contact length of the rear and front mating area ITT Industries Cannon offers 3 different lengths for the front mating area and 4 lengths for the rear mating area for the CHM 2.0 male connectors. A tin-plated Wire Wrap type is equally available. Different contact lengths are required for signal and ground contacts to establish first mate and last break features. The long contacts with 11,25 mm are predominantly used for the shielding rows z and f. Through-hole specification of the PCB Through-plated holes for signal contacts and shieldings in press-fit techniques. Ø e l o Hm m 6 , 0 e l o h l l i r D m m 2 7 , 0 - 8 6 , 0 u C m µ 5 2 . n i m n S m µ 5 1 - 5 h g u o r h t d e t a l P e l o h m m 5 6 , 0 - 5 5 , 0 |
Similar Part No. - CHM-F-B19-P1-0-2 |
|
Similar Description - CHM-F-B19-P1-0-2 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |