04/12/13

1/30

TENTATIVE

1.3 Mega pixel sensor chip

TCM8240MD is an area color image sensor , at 1.3 Mega-pixels of array resolution (1300x 1040) ,

incorporating a camera signal processor . The optical format is 1/3.3 inch, of which small size is suitable for

built-in camera module application. Use of the CMOS process makes possible low power consumption

operations. This sensor provides superb picture quality thanks to Toshiba’s advanced sensor technology

and Toshiba’s sophisticated signal processing technology.

Features

1. General

• Large flexibility in external clock frequency range by PLL operation

(JPEG is not available in case of w/o PLL operation)

• Frame rate

: up to 15 fps for every resolution

• Output data rate reduction for full 1.3 Mega resolution by JPEG compression

• Dual power supply

• Operation temperature

: -20 to + 60 degree C

• Storage temperature: -30 to +85 degree C

2. Sensor

• Optical size

: 1/3.3 inch optical format

• Effective pixel numbers

: 1300(H) x 1040(V)

• Output pixel number

: 1280(H) x1024 (V) maximum

• Pixel pitch

: 3.3um(H)x3.3um(V) (square pixel)

• Image size

: 4.29 mm(H) x 3.43mm(V)

• Color filter

: Primary color filter, Bayer arrangement

3. Camera signal processing

• Digital output mode

Output terminals: 8bit parallel data output along with DCLK, HBLK, and VBLK

(1) YUV=4:2:2 or RGB=5:6:5 data (multiplexed 8bit parallel output )

(2) JPEG encoded data (8 bit parallel) for full 1.3 Mega data

• Multi-step digital zoom for downsized VGA, QVGA, QQVGA, CIF, QCIF and subQCIF

• Vertical and horizontal flip

• ALC ( automatic luminance level control) with fluorescent flicker-less operation

• AWB ( automatic white balance)

• Automatic blemish detection and correction

• Strobe pulse for flash trigger

TOSHIBA C

TCM8240MD

Ver 1.2

13/Nov/04

● TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or

jail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to

observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or

damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating range as set forth in the most

recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook.

● The products described in this document are subject to foreign exchange and foreign trade control laws.

● The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA

CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by

implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others.

● The information contained herein is subject to change without notice.