SN74LVC1G0832

SINGLE 3INPUT POSITIVE ANDOR GATE

SCES606 − SEPTEMBER 2004

3

POST OFFICE BOX 655303

logic configurations (continued)

B

Y

C

1

2

3

6

5

4

C

B

A

Y

C

Y

1

2

3

6

5

4

C

A

Y

Figure 2. 2-Input OR Gate

C

Y

C

1

2

3

6

5

4

A

Y

A

B

B

Figure 3. Y = (A

w B) + C

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(see Note 1)

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(see Notes 1 and 2)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±100 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

165

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DCK package

259

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

YEP/YZP package

123

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.

2. The value of VCC is provided in the recommended operating conditions table.

3. The package thermal impedance is calculated in accordance with JESD 51-7.