Electronic Components Datasheet Search |
|
ADM1175-2ARMZ-R7 Datasheet(PDF) 21 Page - Analog Devices |
|
ADM1175-2ARMZ-R7 Datasheet(HTML) 21 Page - Analog Devices |
21 / 24 page ADM1175 Rev. 0 | Page 21 of 24 Table 15. Status Byte Operations Bit Name Function 0 ADC_OC An ADC-based overcurrent comparison has been detected on the last three conversions 1 ADC_ALERT An ADC-based overcurrent trip has happened, which has caused the alert. Cleared by writing to Bit 4 of the ALERT_EN register. 2 HS_OC The hot swap is off due to an analog overcurrent event. On parts that latch off, this is the same as the HS_ALERT status bit (if EN_HS_ALERT = 1). On the retry parts, this indicates the current state: a 0 can indicate that the data was read during a period when the device was retrying, or that it has successfully hot swapped by retrying after at least one overcurrent timeout. 3 HS_ALERT The hot swap has failed since the last time this was reset. Cleared by writing to Bit 4 of the ALERT_EN register. 4 OFF_STATUS The state of the ON/ONB pin. Set to 1 if the input pin is deasserted. Can also be set to 1 by writing to the SWOFF bit of the CONTROL register. 5 OFF_ALERT An alert has been caused by either the ON/ONB pin or the SWOFF bit. Cleared by writing to Bit 4 of the ALERT_EN register. |
Similar Part No. - ADM1175-2ARMZ-R7 |
|
Similar Description - ADM1175-2ARMZ-R7 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |