![]() |
Electronic Components Datasheet Search |
|
ADM483 Datasheet(PDF) 5 Page - Analog Devices |
|
ADM483 Datasheet(HTML) 5 Page - Analog Devices |
5 / 16 page ![]() ADM483 Rev. 0 | Page 5 of 16 ABSOLUTE MAXIMUM RATINGS TA = 25°C, unless otherwise noted. Table 3. Parameter Rating VCC to GND 6 V Digital I/O Voltage (DE, RE, DI, ROUT) –0.3 V to VCC + 0.3 V Driver Output/Receiver Input Voltage –9 V to +14 V Operating Temperature Range –40°C to +85°C Storage Temperature Range –65°C to +125°C θJA Thermal Impedance (SOIC) 110°C/W Lead Temperature Soldering (10 s) 300°C Vapor Phase (60 s) 215°C Infrared (15 s) 220°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. |