Electronic Components Datasheet Search |
|
HSDL-3209-021 Datasheet(PDF) 4 Page - Agilent(Hewlett-Packard) |
|
HSDL-3209-021 Datasheet(HTML) 4 Page - Agilent(Hewlett-Packard) |
4 / 16 page 4 Electrical & Optical Specifications Specifications (Min. & Max. values) hold over the recommended operating conditions unless otherwise noted. Unspecified test conditions may be anywhere in their operating range. All typical values (Typ.) are at 25°C with Vcc set to 3.0V and IOVcc set to 1.8V unless otherwise noted. Notes: 4. For in-band signals from 9.6kbit/s to 115.2 kbit/s, where 9 µW/cm2 ≤ EI ≤ 500mW/cm2. 5. Latency time is defined as the time from the last TxD light output pulse until the receiver has recovered full sensitivity 6. Receiver wake up time is measured from Vcc power on or SD pin high to low transition to a valid RXD output. 7. The maximum optical PW is the maximum time the LED remains on when the TXD is constantly high. This is to prevent long turn on time of the LED for eye safety protection. 8. For Vcc > 3V and IOVcc < 1.8V, ICC1 can exceed 15uA. Parameter Symbol Min. Typ. Max. Units Conditions Receiver Viewing Angle 2 θ ½ 30 ° Peak Sensitivity Wavelength λp 880 nm RXD Output Voltage Logic High VOH IOVcc-0.2 IOVcc V IOH = -200 µA, EI ≤ 1.0 µW/cm2 Logic Low VOL 00.4 V IOL = 200 µA, EI ≥ 8.1 µW/cm2 RXD Pulse Width (SIR) [4] tPW (SIR) 1 4.0 µs θ ½ ≤ 15°, CL =9 pF RXD Rise and Fall Times tr, tf 60 ns CL =9 pF Receiver Latency Time [5] tL 50 µs Receiver Wake Up Time [6]tW 100 µs Transmitter Radiant Intensity IEH 414 mW/sr ILEDA= 50 mA, θ ½ ≤ 15°, V TXD ≥ V IH TA=25 °C, IOVcc = 1.8V Viewing Angle 2 θ ½ 30 60 ° Peak Wavelength λp 875 nm Spectral Line Half Width ∆λ½ 35 nm TXD Input Current High IH 0.02 10 µA VI ≥ V IH Low IL -10 -0.02 10 µA 0 ≤ V I ≤ V IL LED Current On IVLED 50 mA VI(TXD) ≥ V IH Shutdown IVLED 200 nA VI(SD) ≥ V IH Optical Pulse Width (SIR) tPW (SIR) 1.4 1.6 1.8 µs tPW (TXD) = 1.6 µs at 115.2 kbit/s Maximum Optical PW [7] tPW(max.) 100 µs TXD Rise and fall Time (Optical) tr, tf 600 ns tpw(TXD) = 1.6 µs LED Anode On State Voltage VON(LEDA) 1.55 1.8 V ILEDA=50mA, VI(TXD) ≥ V IH Transceiver Supply Current Shutdown [8] ICC1 1 µA VSD ≥ V IH, TA=25°C Idle ICC2 100 µA VI(TXD) ≤ V IL, EI = 0 |
Similar Part No. - HSDL-3209-021 |
|
Similar Description - HSDL-3209-021 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |