R2 50Ω Input Termination

FN Input

This Section Configured by User

Figure 22, DRF100 Eval Board

The DFR100 is a high power device and must have adequate cooling for full power operation

Evaluation Boards are provided to facilitate the circuit design process by allowing the end user to quickly

evaluate the performance of our components under a specific and single set of conditions. They are not

intended to be used as a sub assembly in any final product(s). Care has been taken to insure that the

Evaluation Boards are assembled to correctly represent the test circuit included in the component data

sheet. There is no warranty of these Evaluation Boards beyond workmanship and materials.

DRF100