M66503ASP datasheet(4/8 Pages) MITSUBISHI

Part #	M66503ASP

Description	16-BIT CONSTANT CURRENT LED DRIVER with SHIFT REGISTER AND LATCH

Download	8 Pages

Scroll/Zoom	100%

Manufacturer	MITSUBISHI [Mitsubishi Electric Semiconductor]

Direct Link	http://www.mitsubishichips.com

Logo

4 / 8 page

4

MITSUBISHI

〈DIGITAL ASSP〉

M66503ASP/AGP

16-BIT CONSTANT CURRENT LED DRIVER with SHIFT REGISTER AND LATCH

OPERATION

1. LED Drive Current Settings

The M66503A has an internal power supply, which pro-

vides a constant current to each bit output. The output

value of the constant current is set by means of a load re-

sistor, RC,connected between the RC pin and GND and is

approximated by the equation below.

IO (Qn) =5·VCC/(2·RC +100)

2. Switching Operation

If the output data of the latch is “H”, LED lights up. The

value of the LED drive current is IO(Qn). If the output data

of the latch is “L”, LED goes off, and the LED drive current

becomes nearly zero, irrespective of the value of IO(Qn).

3. How to Use the OEA and OEB Inputs

If OEA = “L” and OEB = “L”, all output currents are turned

off. Accordingly, it is possible to prevent a large current

from flowing through LESs by, for example, fixing both

OEA and OEB to “L” until VCC, after turned on, reaches a

steady state. If OEA =“H”, all output currents turn on. This

function facilitates the checking of LEDs for failure. When

OEA =“L” and OEB =“H”, each output current turns on and

off according to the output data of the latch.

4. VCC and GND Pins

Pins related to the power supply function are VCC and

GNDs 1-5 (GNDs 1-3 for the M66503AGP). The role of

these pins in terms of the internal circuits are as follows.

VCC

: commonly used by both digital and

analog circuits

GND 1

: used by digital circuits

GNDs 2-5 (2-3)

: used by analog circuits

In practical wiring, the following should be noted.

(1) Secure as much width as possible for conductors and

avoid lengthy wiring.

(2) Allocate electrolytic capacitors for stable voltage near VCC

and GNDs 2-5 (2-3).

(3) Allocate by-pass capacitor near VCC and GND1.

Similar Part No. - M66503ASP

Manufacturer	Part #	Datasheet	Description
Mitsubishi Electric Sem...	M66500FP	562Kb / 11P	PROGRAMMABLE BUFFERED I/0 EXPANDER
Mitsubishi Electric Sem...	M66500SP	562Kb / 11P	PROGRAMMABLE BUFFERED I/0 EXPANDER

More results

Similar Description - M66503ASP

Manufacturer	Part #	Datasheet	Description
Marktech Corporate	TB62708N	305Kb / 9P	16 Bit Constant Current LED Source Driver with Shift Register and Latch Functions
Marktech Corporate	TB62705CP	382Kb / 10P	8 Bit Constant Current LED Driver with Shift Register and Latch Functions
Renesas Technology Corp	M66310P	169Kb / 10P	16-Bit LED Driver with Shift Register and Latch
	R8A66160DD	586Kb / 8P	16-BIT LED DRIVER WITH SHIFT REGISTER AND LATCH
	R8A66161DD	682Kb / 8P	16-BIT LED DRIVER WITH SHIFT REGISTER AND LATCH
Mitsubishi Electric Sem...	M66310P	221Kb / 5P	16-BIT LED DRIVER WITH SHIFT REGISTER AND LATCH
Mitsubishi Electric Sem...	M66311P	213Kb / 5P	16-BIT LED DRIVER WITH SHIFT REGISTER AND LATCH?
Renesas Technology Corp	M66311P	168Kb / 10P	16-Bit LED Driver with Shift Register and Latch
Panasonic Semiconductor	DN8667NS	49Kb / 5P	8-Bit Shift Register Latch Constant Current Driver IC
Renesas Technology Corp	R8A66162SP	476Kb / 8P	32-BIT LED DRIVER WITH SHIFT REGISTER AND LATCH

More results

M66503ASP Datasheet(PDF) 4 Page - Mitsubishi Electric Semiconductor

M66503ASP Datasheet(HTML) 4 Page - Mitsubishi Electric Semiconductor

Similar Part No. - M66503ASP

Similar Description - M66503ASP

Html Pages

1 2 3 4 5 6 7 8

Datasheet Download

Link URL