SENSITRON
SEN-R-956-XXX
SEMICONDUCTOR
• 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
TECHNICAL DATA SHEET 4200…SURFACE MOUNT DIE WITH HEAT ABSORBING STANDOFF TERMINAL STRIPS
TRANSIENT VOLTAGE SUPPRESSOR 500 WATT SERIES
Glass Passivated Die Plus Dual Heat Strips
Features:
• Low Profile
• Broad Voltage Range Available - - 6.8 to 200 Volts
•
Broad Spectrum Transient Suppression
•
Rapid Response - - 4 nanoseconds typical
•
Built-in Heat Absorbing Terminations
•
Electrically Similar to Mil-Prf-19500/516
Applications:
•
Connector I/O Surge Suppression
•
Data Line Protection
Description:This is a bipolar transient voltage
suppressor series extending from 6.8 volts to 200 volts
intended for surface mount applications.
Each device comes as a “Cell” with its own heat absorbing
terminals pre-bonded at high temperature. This permits
mounting on printed circuit boards that cannot provide
their own heat sinking. Each terminal is silver plated and is
solderable permitting solder down attachment with a very
small footprint. Each unit is bi-symmetrical so any
orientation can be used.
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
Test Conditions
Min
TYP
Max.
Units
Response Turn-on Time
ton
2
5
ns
Transient
Energy
Pulse
(Cell)
Ep 1
10uS rise, I= 0.5Ip at t=100us (exponential
decay)
1500
W
Transient
Energy
Pulse
(Cell)
Ep 2
10uS rise, I= 0.5Ip at t=1.0mS (exponential
decay)
500
W
Transient
Energy
Pulse
(Cell)
Ep 3
10uS rise, I= 0.5Ip at t=10mS (exponential
decay)
150
W
Transient
Energy
Pulse
(Cell)
Ep 4
10uS rise, I= 0.5Ip at t=50mS (exponential
decay)
70
W
Transient
Energy
Pulse
(Cell)
Ep 5
10uS rise, I= 0.5Ip at t=50mS (step pulse)
50
W
Electrical Parameters
See Table
Maximum
Solder
Temperature
Tmax
10 second exposure
300
ºC
Thermal Resistance (J-C)
ΤJC
Assume heat sink on terminal strip ends
18
30
ºC/W