Switching Characteristics

Over recommended operating supply and temperature ranges unless otherwise specified. (Notes 3, 8)

Symbol

Parameter

Conditions

Min

Typ

Max

Units

DRIVER AC SPECIFICATION

t

PLH

Differential Propagation Delay Low to High

R

Ω,C

1.3

3.4

5.5

ns

t

PHL

Differential Propagation Delay High to Low

C

1.3

3.1

5.5

ns

t

Pulse Skew |t

Figure 6 and Figure 7

300

420

ps

t

SKD3

Part-to-Part Skew (Notes 6, 9)

2.2

ps

t

Rise Time (Note 9)

1.0

1.8

3.0

ns

t

Fall Time (Note 9)

1.0

1.8

3.0

ns

t

PZH

Enable Time (Z to Active High)

R

Ω,C

8

ns

t

PZL

Enable Time (Z to Active Low )

C

8

ns

t

PLZ

Disable Time (Active Low to Z)

Figure 8 and Figure 9

8ns

t

PHZ

Disable Time (Active High to Z)

8

ns

t

JIT

Random Jitter, RJ (Note 9)

100 MHz Clock Pattern (Note 7)

2.5

5.5

psrms

f

MAX

Maximum Data Rate

200

Mbps

RECEIVER AC SPECIFICATION

t

PLH

Propagation Delay Low to High

C

2.0

4.7

8.5

ns

t

PHL

Propagation Delay High to Low

Figures 10, 11 and Figure 12

2.0

5.3

8.5

ns

t

Pulse Skew |t

0.6

1.7

ns

t

SKD3

Part-to-Part Skew (Notes 6, 9)

3.3

ns

t

Rise Time (Note 9)

0.5

1.2

2.5

ns

t

Fall Time (Note 9)

0.5

1.2

2.5

ns

t

PZH

Enable Time (Z to Active High)

R

Ω,C

10

ns

t

PZL

Enable Time (Z to Active Low)

Figure 13 and Figure 14

10

ns

t

PLZ

Disable Time (Active Low to Z)

10

ns

t

PHZ

Disable Time (Active High to Z)

10

ns

f

MAX

Maximum Data Rate

200

Mbps

Note 1: “Absolute Maximum Ratings” are those beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the device should

be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.

Note 2: All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to device ground unless otherwise specified.

Note 4: The algebraic convention, in which the least positive (most negative) limit is designated as minimum, is used in this datasheet.

the same channel.

Note 7: Stimulus and fixture Jitter has been subtracted.

Note 9: Not production tested. Guaranteed by a statistical analysis on a sample basis at the time of characterization.

www.national.com

5