TYPICAL CONNECTION CIRCUIT

Rev. A 5/02

5

not be located near ground planes if possible. A high quality resistor such as Bradford Electronics P/N FP10-200

is reqired for optimum response times. Use an inductor with a high self-resonant frequency that can withstand

the currents required for the application. The ferrite beads should be located as close to the DUT as possible.

Fare-Rite Corporation P/N 2743001111 beads work well for most applications. For additional applications informa-

tion, please contact MSK. Evaluation amplifiers with test boards are readily available upon request.

NOTES: