NJU7505

-5 -

Ver.2004-06-04

Since each RD signal of the master and the slave is

switched, the output data should be read out within the

limited time as shown right;

* The "( )" is corresponded to the slave.

If the RST signal which pulse width is more than

initialized and the data of f1 band is output from the

edge of the RST signal.

The RST signal for the slave should be set to "L" level

while the RST signal for the master is "L" level and

rise edge of the RST signal for the slave.

248 / fosc

(248/ fosc*3/2)

RD

8 / fosc

(8/ fosc*3/2)

Available Period

of Read-out

(Master)

RST

(Master)

RST

(Slave)

(Slave)

fn

f1

4/fosc[MIN]

52/ fsoc

6/fosc[MIN]

78/ fsoc

fn’

f1’