![]() |
Electronic Components Datasheet Search |
|
PLL701-05 Datasheet(PDF) 3 Page - PhaseLink Corporation |
|
PLL701-05 Datasheet(HTML) 3 Page - PhaseLink Corporation |
3 / 5 page ![]() Preliminary PLL701-05 Low EMI Spread Spectrum Multiplier Clock 47745 Fremont Blvd., Fremont, California 94538 TEL (510) 492-0990 FAX (510) 492-0991 Rev 09/26/02 Page 3 ELECTRICAL SPECIFICATIONS 1. Absolute Maximum Ratings PARAMETERS SYMBOL MIN. MAX. UNITS Supply Voltage VDD VSS -0.5 6 V Input Voltage Range VI VSS -0.5 VDD +0.5 V Output Voltage Range VO VSS -0.5 VDD +0.5 V Soldering Temperature 260 °C Storage Temperature TS -65 150 °C Ambient Operating Temperature* TA -40 85 °C Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above the operational limits noted in this specification is not implied. * Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for INDUSTRIAL grade only. 2. DC/AC Specification PARAMETERS SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Supply Voltage VDD 3.15 3.45 V Input High Voltage VIH 0.7*VDD V Input Low Voltage VIL 0.3*VDD V Input High Current IIH 100 µA Input Low Current IIL 100 µA Output High Voltage VOH IOH=5mA, VDD=3.3V 2.4 Output Low Voltage VOL IOL=6mA, VDD=3.3V 0.4 Input Frequency FIN 30 120 MHz Maximum interruption of FIN 100 µs Input Capacitance Cin1 4 pF Pull-up Resistor Rpu PIN 2, 3 60 125 200 K Ω Pull-down Resistor Rpd PIN 4, 7 60 125 200 K Ω Short Circuit Current Isc 25 mA 3.3V Dynamic Supply Current ICC No Load 20 mA |