P-TO263-15-1

Data Sheet

1

2001-02-01

TrilithIC

Data Sheet

BTS 7750 GP

1Overview

1.1

Features

• Quad D-MOS switch driver

• Free configurable as bridge or quad-switch

• Optimized for DC motor management applications

side switch (typical values @ 25

C)

• Maximum peak current: typ. 12 A @ 25

C=

• Very low quiescent current: typ. 5

←A @ 25 C=

• Small outline, thermal optimized PowerPak

• Full short-circuit-protection

• Operates up to 40 V

• Status flag diagnosis

• Overtemperature shut down with hysteresis

• Internal clamp diodes

• Isolated sources for external current sensing

• Under-voltage detection with hysteresis

• PWM frequencies up to 1 kHz

1.2

Description

The BTS 7750 GP is part of the TrilithIC

family containing three dies in one package:

One double high-side switch and two low-side switches. The drains of these three

vertical DMOS chips are mounted on separated leadframes. The sources are connected

to individual pins, so the BTS 7750 GP can be used in H-bridge- as well as in any other

configuration. Both the double high-side and the two low-side switches of the

R

fully protected and contains the control and diagnosis circuitry. Also the low-side

switches are fully protected, the equivalent standard product is the BTS 134 D.

In contrast to the BTS 7750 G, which consists of the same chips in an P-DSO-28

package, the P-TO263-15-1 PowerPack offers a much lower thermal resistance, which

opens up applications with even higher currents in the automotive and industrial area.

Type

Ordering Code

Package

BTS 7750 GP

Q67006-A9402

P-TO263-15-1