AZ100EL16VS
ECL/PECL Differential Receiver with Variable Output Swing
1630 S. STAPLEY DR., SUITE 125
• MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (480) 890-2541
www.azmicrotek.com
ARIZONA MICROTEK, INC.
FEATURES
•
250ps Propagation Delay
•
High Bandwidth Output Transitions
•
75k
Ω Internal Input Pulldown Resistors
•
Functionally Equivalent to ON
Semiconductor MC100EL16
•
Variable Output Swing
•
Available in a 3x3mm MLP Package
DESCRIPTION
The AZ100EL16VS is a differential receiver with variable output swing. The EL16VS has functionality and
output transition times similar to the EL16, with an input that controls the amplitude of the Q/Q
¯ outputs. Maximum
swing is achieved by leaving the VCTRL pin open or tied to VEE.
The operational range of the EL16VS control input, VCTRL, is from VBB (full swing) to VCC (min. swing).
Simple control of the output swing can be obtained by a variable resistor between the VBB and VCC pins, with the
wiper driving VCTRL. Typical application circuits and results are described in this Data Sheet.
The EL16VS provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device.
For single-ended input applications, the VBB reference should be connected to one side of the D/D
¯ differential input
pair. The input signal is then fed to the other D/D
¯ input. The VBB pin can support 1.0mA sink/source current.
When used, the VBB pin should be bypassed to ground via a 0.01
µF capacitor.
Under open input conditions (pulled to VEE) internal input clamps will force the Q output LOW.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
PACKAGE AVAILABILITY
PACKAGE
PART NO.
MARKING
MLP 8
AZ100EL16VSL
AZM16P
MLP 8 T&R
AZ100EL16VSLR1
AZM16P
MLP 8 T&R
AZ100EL16VSLR2
AZM16P
SOIC 8
AZ100EL16VSD
AZM100EL16VS
SOIC 8 T&R
AZ100EL16VSDR1
AZM100EL16VS
SOIC 8 T&R
AZ100EL16VSDR2
AZM100EL16VS
TSSOP 8
AZ100EL16VST
AZH16VS
TSSOP 8 T&R
AZ100EL16VSTR1
AZH16VS
TSSOP 8 T&R
AZ100EL16VSTR2
AZH16VS